Upcoming Games

No games to display

Full list
Add a game

Upcoming Events

No events to display

Appleford Crossing, Can't lower?

You are here: Home > Forum > Simulations > Released > Swindon A and B > Appleford Crossing, Can't lower?

Page 1 of 1

Appleford Crossing, Can't lower? 18/07/2013 at 17:59 #47332
Kage
Avatar
65 posts
Haven't seen anything on here regarding this...

Haven't played this one in a while, only played a bit when the .277 refresh came out, well I started again today, and I got a call that someone wanted to cross at Appleford, so I raised the gates, but nothing I can do will lower them again.

Log in to reply
Appleford Crossing, Can't lower? 18/07/2013 at 18:54 #47333
Albert
Avatar
1313 posts
I seem to recall there is a lock button to keep them raised, which you can unclick with a right-click or something like that.
AJP in games
Log in to reply
Appleford Crossing, Can't lower? 18/07/2013 at 18:54 #47334
Noisynoel
Avatar
989 posts
Have you destroyed the routes on both the up and down lines before lowering them again?
Does it come up with any messages when you do eg Crossing blocked by a road vehicle?

Noisynoel
Log in to reply
Appleford Crossing, Can't lower? 18/07/2013 at 19:22 #47337
BarryM
Avatar
2158 posts
" said:
Haven't seen anything on here regarding this...

Haven't played this one in a while, only played a bit when the .277 refresh came out, well I started again today, and I got a call that someone wanted to cross at Appleford, so I raised the gates, but nothing I can do will lower them again.

I seem to recall there is a lock button to keep them raised, which you can unclick with a right-click or something like that.
The locking is in the hands of the signaller. Right clicking cancels a movement. Be patient. When you press the LOWER button, the RAISE indicator is solid, the LOWER indicator starts flashing. After about 30 to 60 seconds, the RAISE indicator goes out indicating the barriers are lowering. It may take up to another 60 secs for the LOWER indicator to stop flashing.

Barry

Barry, Sydney, New South Wales, Australia
Last edited: 18/07/2013 at 19:25 by BarryM
Reason: new

Log in to reply
Appleford Crossing, Can't lower? 18/07/2013 at 19:45 #47338
Kage
Avatar
65 posts
No routes set, No Message.
It does the same on a new game, with no TT.


BarryM, that's how I expect it work, and neither left or right clicking Lower makes the
indicator flash, and AFAIK for this crossing, left clicking should start the Lower cycle.

Set it to max speed, and clicked, just in case it was a visual but, but no luck.

Log in to reply
Appleford Crossing, Can't lower? 18/07/2013 at 20:57 #47345
headshot119
Avatar
4869 posts
I've just opened Swindid and left clicking raise raises the crossing. Then left clicking lower, lowers the crossing.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Log in to reply
Appleford Crossing, Can't lower? 18/07/2013 at 21:57 #47349
BarryM
Avatar
2158 posts
Have you tried rebooting your computer?

Barry

Barry, Sydney, New South Wales, Australia
Last edited: 18/07/2013 at 21:57 by BarryM
Log in to reply
Appleford Crossing, Can't lower? 18/07/2013 at 22:36 #47352
Kage
Avatar
65 posts
I found the cause: The idiot typing this :doh

It works now...

This topic can be deleted

Log in to reply