Upcoming Games

No games to display

Full list
Add a game

Upcoming Events

No events to display

ID Berth Stepping Bug, Willesden South West Sidings

You are here: Home > Forum > Simulations > Released > Wembley Main Line > ID Berth Stepping Bug, Willesden South West Sidings

Page 1 of 1

ID Berth Stepping Bug, Willesden South West Sidings 22/07/2014 at 12:01 #63011
y10g9
Avatar
895 posts
In further testing of this issue, I tested running 0L51 onto 6L51 (times were edited to allow 0L51 to enter the sim immediately after 6l49 exited the sim for time saving purpose).
0L51 left the Ferrous Fragmenters and I interposed his ID into the Berth at 1185 (Shunt signal protecting the points for the entry to the Ferrous). Having set a route from 1185 to 621 (Signal on the Down end of U&D SW REV) the ID stepped up correctly



I then selected a route from 621 to the white triangle attached to 623, which allowed 0L51 to call-on to 6L51. However 0L51 passed 621, its ID stepped from 621 Berth to the berth associated with 626 rather than the berth which 6L51 was interposed in (signal 744)




I have repeated this on several times while producing this report. Of note also is when i first saw this, i didn't have 6L51 interposed and the IDt still stepped to the wrong berth.

A save game just prior to the ID Stepping up is attached. NB you may want to mute your speakers as i took this from the 0640 snapshot and continued it just focusing of 6L49/6L51/0L51 in regards to the Willesden South West Sidings bug.

[attachment=2571]WillesdenIDSteppingIssue.ssg[/attachment]

Post has attachments. Log in to view them.
Log in to reply
ID Berth Stepping Bug, Willesden South West Sidings 22/07/2014 at 12:54 #63013
officer dibble
Avatar
390 posts
Nathan,

When 6L49 enters from Acton, the train needs to be routed into the "SW THRU SDG" & onto the "U&D SW REV", that is 628-748-738. The train will then divide with the front portion of the train detaching for Ferrous Fragmentation & leaving behind the wagons for 6L51 (0L51 will come out of F.F. to attach to them accordingly).

When sending a train into Willesden F.F. you need to route 738-622-headshunt & the train will stop & go in as one would hope. When 0L51 appears the loco should then be routed onto the wagons in the "SW THRU SDG" by setting a route from 621 to the white triangle & boom, Bob's your uncle, the loco & wagons form the next portion. 6L51 is to then be routed as per 6L49 to access W.F.F.

HTH

Paul B)

Log in to reply
ID Berth Stepping Bug, Willesden South West Sidings 22/07/2014 at 13:56 #63015
y10g9
Avatar
895 posts
" said:
Nathan,

When 6L49 enters from Acton, the train needs to be routed into the "SW THRU SDG" & onto the "U&D SW REV", that is 628-748-738. The train will then divide with the front portion of the train detaching for Ferrous Fragmentation & leaving behind the wagons for 6L51 (0L51 will come out of F.F. to attach to them accordingly).

When sending a train into Willesden F.F. you need to route 738-622-headshunt & the train will stop & go in as one would hope. When 0L51 appears the loco should then be routed onto the wagons in the "SW THRU SDG" by setting a route from 621 to the white triangle & boom, Bob's your uncle, the loco & wagons form the next portion. 6L51 is to then be routed as per 6L49 to access W.F.F.

HTH

Paul B)

Cheers Paul
I worked that out in the other thread. This was a discovery while testing the down siding line as i had originally put it on the up siding, finding i couldn't then call onto the wagons.

Log in to reply
ID Berth Stepping Bug, Willesden South West Sidings 22/07/2014 at 14:55 #63017
officer dibble
Avatar
390 posts
Righty o!
Log in to reply
The following user said thank you: JamesN
ID Berth Stepping Bug, Willesden South West Sidings 22/07/2014 at 16:00 #63023
GeoffM
Avatar
6274 posts
I've noted the TD incorrectly stepping to our issues board. Thanks.
SimSig Boss
Log in to reply
The following user said thank you: y10g9