Page 1 of 1
| Euston Help 16/04/2012 at 17:56 #31641 | |
England345
5 posts |
Can anybody help, instructed to get engine from Camden Yard (up) waiting at signal CY43, but cant see it any where, can anybody tell me how i get it out of the yard, thank you.
Log in to reply |
| Euston Help 16/04/2012 at 18:21 #31644 | |
|
Essexgirl
41 posts |
You need to use the ground frame. In the show menu select lever frames and then the required frame, after giving the release. pull required levers and train should move. once move complete, rest the lever frame, and take back the release Log in to reply |
| Euston Help 16/04/2012 at 18:22 #31645 | |
Steamer
3920 posts |
The train has entered at Camden yard up. There is no TD berth at signal CY43, and the yard is not track-circuited, so you wont be able to see it. To let the train leave the yard, set a route from CY43 to signal 116 on the Up Fast. Then you need to operate the ground frame. Click the right-hand green button under the label '603', which is at the London end of Camden Yard, to release the frame. The button will flash when you click it. Then, go to Show>Lever Frames>Camden Yard (east end). Move lever 42 down to release the frame, then lever 44 to change the points, then move lever 43 down to clear the signal. The train will now leave the sidings. Press the 'I' key, then enter the train description, then click signal 116 to interpose the description, then signal the train as normal to Euston. When the loco has cleared the points from the yard, then move lever 43 back up, then lever 44, and finally lever 42. Then right-click the flashing white light next to lock the frame.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Euston Help 16/04/2012 at 19:17 #31647 | |
postal
5190 posts |
" said:Can anybody help, instructed to get engine from Camden Yard (up) waiting at signal CY43, but cant see it any where, can anybody tell me how i get it out of the yard, thank you.Did you check out the manual? Although the manual is not held on the Wiki, there is a link posted on the Wiki to take you to the developer's web-site where the full and up-to-date manual is kept. The manual includes instructions for working the ground frames at each end of the sidings. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |