Page 1 of 1
| Salisbury East CHS #2... 09/05/2015 at 21:59 #72018 | |
kaiwhara
584 posts |
Hi Andy I have started a new 2015 timetable for Salisbury, and the Carriage Working Notice shows several empty stock movements from #2 Road to Platform 6. In 2000 mode, this road by default is blocked off. Could we perhaps have a 2010 mode that reinstates this road please? Cheers Andrew Sorry guys, I am in the business of making people wait! Log in to reply |
| Salisbury East CHS #2... 09/05/2015 at 22:20 #72019 | |
Steamer
3920 posts |
Could it be an error in the document? I believe SWT once diagrammed stock to use Guildford No.2 siding even though it was OOU...
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 09/05/2015 at 22:23 by Steamer Log in to reply |
| Salisbury East CHS #2... 09/05/2015 at 22:39 #72020 | |
Muzer
718 posts |
My Quail map dating from November 2008 shows Down Siding 1 and Down Siding 2 in use, with the three other sidings NIRU. So I suspect the CWN is correct, and either the sim is wrong or the siding reopened since 2000. Of course, it is possible that both the map and the CWN are wrong.
Last edited: 09/05/2015 at 22:42 by Muzer Log in to reply |
| Salisbury East CHS #2... 09/05/2015 at 23:19 #72021 | |
jc92
3629 posts |
Try manually removing the collars and then running trains in as per normal. A few sims have collars which are era specific but dont actually lock out equipment any more than a user placed one does If that works just pop a note in the tt notes. "We don't stop camborne wednesdays" Log in to reply |
| Salisbury East CHS #2... 09/05/2015 at 23:34 #72022 | |
|
kaiwhara
584 posts |
" said:Could it be an error in the document? I believe SWT once diagrammed stock to use Guildford No.2 siding even though it was OOU...Spoken to a guy who used to be a signaller there, who also lives in Salisbury. Definitely in use... Sorry guys, I am in the business of making people wait! Log in to reply The following user said thank you: Steamer |
| Salisbury East CHS #2... 10/05/2015 at 14:03 #72049 | |
Temple Meads
307 posts |
" said:Try manually removing the collars and then running trains in as per normal. A few sims have collars which are era specific but dont actually lock out equipment any more than a user placed one doesI've just tested this method, and it appears to work fine. Username TIM in multiplayer Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 16:50 #72057 | |
|
kaiwhara
584 posts |
" said:" said:Will have a play with this later. As a workaround for the time being I have stuck the empty stock for 1L14 in the East Yard Headshunt seeing as that isn't used for anything, but I will have a fiddle with it to see what I can do. I know I can get something out of CHS #2, as I have already tried that using the method described. What I haven't yet tested is how to get something in, as I haven't yet been able to remove the Track Isolation...Try manually removing the collars and then running trains in as per normal. A few sims have collars which are era specific but dont actually lock out equipment any more than a user placed one doesI've just tested this method, and it appears to work fine. Sorry guys, I am in the business of making people wait! Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 16:57 #72058 | |
|
Muzer
718 posts |
Go into incident control panel (F11), track circuits, click the mouse icon, click the track circuit in question, then select "None" in the Isolations box.
Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 16:59 #72059 | |
|
kaiwhara
584 posts |
" said:Go into incident control panel (F11), track circuits, click the mouse icon, click the track circuit in question, then select "None" in the Isolations box.That's the issue. I have tried that, but I cannot get it to select the Track Circuit... Sorry guys, I am in the business of making people wait! Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 17:09 #72060 | |
|
AndyG
1834 posts |
Looking at the panels photos again, it seems that it's CS#1 that was OOU, with the hand points clipped Rev. I've amended the simulation, so that #2 is in use rather than #1, and will consider whether either siding is OOU in a later era.
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 17:11 #72061 | |
|
kaiwhara
584 posts |
" said:Looking at the panels photos again, it seems that it's CS#1 that was OOU, with the hand points clipped Rev. I've amended the simulation, so that #2 is in use rather than #1, and will consider whether either siding is OOU in a later era.Before you do that Andy, CHS #1 is also used by another train :yikes To clarify, December 2014's Carriage Working Notice has 5L93 out of CHS#1, and 5L14 out of CHS#2, and I am assured both are definitely in use... Sorry guys, I am in the business of making people wait! Last edited: 10/05/2015 at 17:13 by kaiwhara Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 17:21 #72062 | |
|
kaiwhara
584 posts |
Right, I have just got more detail on this... From a Former Signaller for this area (still signalling but not at Salisbury). Both Carriage Holding Sidings are open, however, #1 is only accessible to the Down Exeter. Will go into more detail with him on this later, as I'm about to go to work! Sorry guys, I am in the business of making people wait! Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 17:29 #72063 | |
|
Temple Meads
307 posts |
" said:" said:You only need to remove the signal collars, track isolations don't prevent a train using it, I think it's just a visual reminder.Go into incident control panel (F11), track circuits, click the mouse icon, click the track circuit in question, then select "None" in the Isolations box.That's the issue. I have tried that, but I cannot get it to select the Track Circuit... Username TIM in multiplayer Log in to reply |
| Salisbury East CHS #2... 10/05/2015 at 18:16 #72064 | |
|
Steamer
3920 posts |
" said:" said:They do in SimSig- attempting to set a route generates a 'Track Circuit(s) isolated message'." said:You only need to remove the signal collars, track isolations don't prevent a train using it, I think it's just a visual reminder.Go into incident control panel (F11), track circuits, click the mouse icon, click the track circuit in question, then select "None" in the Isolations box.That's the issue. I have tried that, but I cannot get it to select the Track Circuit... You can get around it by pressing the 'Reminder Override' button prior to setting the route. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |