Vic > Salford Crescent

You are here: Home > Forum > Simulations > Released > Manchester North > Vic > Salford Crescent

Page 1 of 1

Vic > Salford Crescent 03/12/2017 at 07:57 #103588
jem771
Avatar
102 posts
as long as they dont stop at salford central will diesels take either route ?

and does that apply on picc coming the other way ?

Jezz
Log in to reply
Vic > Salford Crescent 03/12/2017 at 10:02 #103589
Peter Bennet
Avatar
5354 posts
It's very very rare for diesels not to be allowed to take any route for reason of being a diesel as they have their own power supply.

Peter

I identify as half man half biscuit - crumbs!
Log in to reply
Vic > Salford Crescent 03/12/2017 at 10:29 #103590
Chromatix
Avatar
190 posts
I believe the few cases that exist are due to confined, poorly-ventilated tunnels - Moorgate and Woodhead come to mind. Diesels did occasionally use Woodhead, but it was officially discouraged and a strict spacing between diesel-hauled trains was imposed.

There are also places where diesel locos are banned but DMUs are permitted - this tends to be due to weight problems. In some of those locations Class 37s are specifically exempted from the loco ban, because they exert unusually low track forces for a loco. In the days when the common-carrier freight obligation still existed, power-twin DMUs were used to haul small loads over those lines.

Neither of these cases applies to the Salford area.

Restrictions are more widespread on steam locos these days. Smoke emissions are considered a much bigger problem now than they were 80 years ago, and loading-gauge restrictions have developed to accommodate bogie stock much more easily than a kettle's rigid, overhanging frame. Class 9F is outright banned from the mainline (even if hauled dead) because its flangeless centre drivers are incompatible with modern guard rails which are raised slightly above the running rail. Etc, etc.

And, obviously, an electric train can only traverse a line with a compatible power supply. I understand the two 1500V systems covering Woodhead and Altrincham were physically separated by the 25kV AC system coming from the WCML, which must have made things very interesting at London Road.

Log in to reply
Vic > Salford Crescent 03/12/2017 at 11:35 #103593
Steamer
Avatar
3913 posts
jem771 in post 103588 said:
as long as they dont stop at salford central will diesels take either route ?

and does that apply on picc coming the other way ?
I don't know whether the trains will report a wrong route, but yes, it would be possible in real life, same in the opposite direction. However, virtually everything calls at Central.

"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q)
Log in to reply
Vic > Salford Crescent 03/12/2017 at 12:24 #103595
jc92
Avatar
3626 posts
Peter Bennet in post 103589 said:
It's very very rare for diesels not to be allowed to take any route for reason of being a diesel as they have their own power supply.

Peter
Only modern example i can think of is platform 0 at Kings cross has restrictions on dwell times for HSTs using it.

"We don't stop camborne wednesdays"
Log in to reply
Vic > Salford Crescent 03/12/2017 at 13:44 #103600
pedroathome
Avatar
881 posts
Steamer in post 103593 said:
jem771 in post 103588 said:
as long as they dont stop at salford central will diesels take either route ?

and does that apply on picc coming the other way ?
I don't know whether the trains will report a wrong route, but yes, it would be possible in real life, same in the opposite direction. However, virtually everything calls at Central.
On Manchester North, trains booked for Salford Cresent WILL report wrong route. My understanding is that in reality, drivers don't necessarily sign the diversionary route via Ordsall Junction.

James

Log in to reply
Vic > Salford Crescent 03/12/2017 at 14:51 #103602
Peter Bennet
Avatar
5354 posts
Perhaps I should clarify what I meant above.

I queried the point years ago because there is no option in the core code to inhibit diesel power using a piece of track. The answer being, that because the power restrictions on SimSig is intended to be a physical one rather than one of policy.
So because a diesel train has its own power supply it can literally go anywhere.

What can be done is enforce a policy restriction through bespoke coding, perhaps by applying a penalty, or a 0mph speed restriction based on power.

Peter

I identify as half man half biscuit - crumbs!
Last edited: 03/12/2017 at 14:52 by Peter Bennet
Reason: sense check

Log in to reply
Vic > Salford Crescent 04/12/2017 at 11:14 #103613
norman B
Avatar
111 posts
It would be a real surprise if all TPE and Northern Drivers did not sign the route.

As this chord will become part of a standard diversionary route most companies will require drivers to learn the route.As with all these things some drivers often through no fault of there making will miss out and this will produce problems.

Log in to reply
Vic > Salford Crescent 04/12/2017 at 11:15 #103614
headshot119
Avatar
4869 posts
norman B in post 103613 said:
It would be a real surprise if all TPE and Northern Drivers did not sign the route.

As this chord will become part of a standard diversionary route most companies will require drivers to learn the route.As with all these things some drivers often through no fault of there making will miss out and this will produce problems.
They don't all sign both routes.

"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Log in to reply
The following user said thank you: norman B
Vic > Salford Crescent 05/12/2017 at 10:51 #103655
norman B
Avatar
111 posts
Oh ,how things change!!!!
Log in to reply