Upcoming Games


Full list
Add a game

Carlisle Issues

You are here: Home > Forum > Simulations > Released > Carlisle > Carlisle Issues

Page 7 of 7

Carlisle Issues 10/02/2020 at 18:12 #123219
headshot119
Avatar
3706 posts
Online
HST125Scorton in post 123216 said:
Looking from a latest route learning video from Preston through to Carlisle it would see both Long Ashes and Lazonbys LC/UWC crossing don’t seem to exist. I believe they were closed a while back with new passages underneath as an under pass for the farms.

Scroll to 51:00 in the video to view from Penrith to Carlisle.

Video Link:
https://youtu.be/Dt6pQXVibeU
Long Ashes is clearly visible at 53:08, complete with signage and the downside phone.

"As the last track dropped, and the route became free, came the cry BROMLEY " - Opinions are my own and not those of my employer
Log in to reply
Carlisle Issues 03/07/2020 at 21:36 #128940
HST125Scorton
Avatar
624 posts
Carlisle v4.3 Era 2016

I have some issue regarding trains entering at Kingmoor Up Departures Roads UD1 or UD2.
Train 6C33 enters at 0515 at 05:15:47 the yard marshal ran up to ask which road I would like 6C33 I asked for road UD1. A few seconds later after setting the road for UD1 train 6C33 enters on UD2, this happened with 6M61 earlier in the timetable. I have put up a save for 0510 where the train enters at 0515.

Post has attachments. Log in to view them.
Aaron (AJRO)
Last edited: 03/07/2020 at 21:36 by HST125Scorton
Reason: None given

Log in to reply
Carlisle Issues 03/07/2020 at 21:45 #128942
headshot119
Avatar
3706 posts
Online
HST125Scorton in post 128940 said:
Carlisle v4.3 Era 2016

I have some issue regarding trains entering at Kingmoor Up Departures Roads UD1 or UD2.
Train 6C33 enters at 0515 at 05:15:47 the yard marshal ran up to ask which road I would like 6C33 I asked for road UD1. A few seconds later after setting the road for UD1 train 6C33 enters on UD2, this happened with 6M61 earlier in the timetable. I have put up a save for 0510 where the train enters at 0515.
This is a known issue and logged on Mantis for attention in the future.

"As the last track dropped, and the route became free, came the cry BROMLEY " - Opinions are my own and not those of my employer
Log in to reply
The following user said thank you: HST125Scorton
Carlisle Issues 07/07/2020 at 20:43 #129232
HST125Scorton
Avatar
624 posts
Found another issue regarding platform 1 at Carlisle and TC442 when a train is stood at the platform at CE321 TC442 seems to highlight. I'm not sure if this supposed to happen.


Post has attachments. Log in to view them.
Aaron (AJRO)
Log in to reply
Carlisle Issues 07/07/2020 at 20:58 #129234
y10g9
Avatar
635 posts
A picture alone is not overly helpful for us to see whats going on here. As always, please can you provide a Save for us to be able to look at
Log in to reply
Carlisle Issues 07/07/2020 at 21:01 #129235
HST125Scorton
Avatar
624 posts
y10g9 in post 129234 said:
A picture alone is not overly helpful for us to see whats going on here. As always, please can you provide a Save for us to be able to look at
Sorry thought I uploaded the save at 0600 sim time and 0610.

Post has attachments. Log in to view them.
Aaron (AJRO)
Log in to reply
Carlisle Issues 07/07/2020 at 21:53 #129241
y10g9
Avatar
635 posts
Cheers. It appears that the subroute on that TC is releasing itself after a period of time which results in the entire of the TC to flood rather than just the part of the TC that had the route set.
Mantis 31026 raised

Log in to reply
Carlisle Issues 07/07/2020 at 21:55 #129242
GeoffM
Avatar
5067 posts
In terms of "is it supposed to flood", yes, when subroute locking is removed. But I do not believe subroute releasing is supposed to happen here (it's very rare to release locking under a train, though in this case it's still safe as the points are dead locked by the track occupied). Instead, any call-on route is supposed to ignore opposing locking in such cases, and I hear occupied for 180 seconds is the time here after which that is allowed.
SimSig Boss
Log in to reply
Carlisle Issues 29/07/2020 at 16:22 #130100
latello99
Avatar
2 posts
Carlisle v4.3 with supplied 79-80 timetable

I can't get 5M10 and 5M14 to join, they keep cycling every second between having the other one in front or waiting to join it (and, not shown, moving at very slow speed or being stopped at Carlisle). I managed to get them to join once by manually reversing 5M14 but I can't reproduce it. I also have snapshots at 0220 and 0230 if they're needed.




Post has attachments. Log in to view them.
Log in to reply
Carlisle Issues 29/07/2020 at 17:32 #130108
y10g9
Avatar
635 posts
I've seen this exhibited on other sims before where there is an shuffling around of the powered portion and unpowered portion before they will join. In your case, about 1 minute after I started your save they started joining together.

Mantis 31244 applies

Log in to reply
The following user said thank you: latello99
Carlisle Issues 31/07/2020 at 22:31 #130248
HST125Scorton
Avatar
624 posts
not sure if I've picked up a bug here at Florison LC. But 2N12 is approaching the crossing at the same time a vehicle has been trapped on the crossing. So I cancel the route and take off Auto and press Raise but they won't rise instead the lower keeps flashing. I have provided a save.
Latest Carlisle version.

Post has attachments. Log in to view them.
Aaron (AJRO)
Log in to reply
Carlisle Issues 31/07/2020 at 23:40 #130253
headshot119
Avatar
3706 posts
Online
HST125Scorton in post 130248 said:
not sure if I've picked up a bug here at Florison LC. But 2N12 is approaching the crossing at the same time a vehicle has been trapped on the crossing. So I cancel the route and take off Auto and press Raise but they won't rise instead the lower keeps flashing. I have provided a save.
Latest Carlisle version.
Thanks, there's an existing ticket to refactor how the crossing works. In your save I put the auto raise back on, and I could get the barriers to lift. But couldn't with auto raise turned off.

"As the last track dropped, and the route became free, came the cry BROMLEY " - Opinions are my own and not those of my employer
Log in to reply
The following user said thank you: HST125Scorton