Page 2 of 2
| Upperby Yard - runround operations 07/11/2020 at 16:46 #133675 | |
mjkerr
174 posts |
Steamer in post 133674 said:
On my previous runs I had the CLST enter the Run Round, there it remained and as a result blocked everything thereafter Once the CLST has been F935 will not change I am now on my fifth attempt DELETED Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 16:48 #133676 | |
postal
5190 posts |
mjkerr in post 133673 said:Steamer in post 133672 said:Further to Steamer's answer, there is a long track-circuited section before you reach CE271 on the Run Round line. This will remain red-filled until the loco is behind CE271. This takes a while at 8mph. but the fill eventually dies when the pilot is behind CE271 and you can signal it back to Upperby Yard.Per the timetable you've posted, the train just shunts onto the run round line, reverses, and goes back to Upperby Yard The Carlisle TT have been written a little differently to most TTs as the sim configuration requires the entry point as the first location in the train TT for a lot of the entry points. This may be helping to confuse matters. Perhaps you might find it easier refreshing your skills on something like Royston rather than a full-blown horror story like the 79-80 Carlisle TT. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 16:53 #133677 | |
|
postal
5190 posts |
mjkerr in post 133675 said:Once the CLST has been F935 will not changeIf you work to the TT and allow the time for moves to complete there is no problem with this move. If you go to the F2 screen (or left click on the TD to show the TT), you can see whether the loco is still moving. The advantage of the F2 screen is that it updates so that you can see when the loco has come to a stop at its reversing location. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 16:53 #133678 | |
|
mjkerr
174 posts |
postal in post 133676 said:nPerhaps you might find it easier refreshing your skills on something like Royston rather than a full-blown horror story like the 79-80 Carlisle TT. I am concentrating solely on Upperby Yard, the rest of Carlisle works fine Equally, until last month I was running Central Scotland or Edinburgh (Windows XP version) These do not have ground frames DELETED Last edited: 07/11/2020 at 16:57 by mjkerr Reason: None given Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 16:54 #133679 | |
|
mjkerr
174 posts |
mjkerr in post 133675 said:Once the CLST has been F935 will not change I appear to have misunderstood the instructions, working now DELETED Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 17:17 #133680 | |
|
Albert
1313 posts |
mjkerr in post 133673 said:Steamer in post 133672 said:Do you by any chance mean the through goods line? If you route the CLST there by mistake it won't reverse by itself.Per the timetable you've posted, the train just shunts onto the run round line, reverses, and goes back to Upperby Yard AJP in games Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 18:19 #133682 | |
|
mjkerr
174 posts |
Albert in post 133680 said:Do you by any chance mean the through goods line? If you route the CLST there by mistake it won't reverse by itself No, the Run Round I (incorrectly) assumed the stock was added to another train later I had not considered it was simply wanting to access the route, then return back to the yard DELETED Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 19:21 #133685 | |
|
postal
5190 posts |
mjkerr in post 133678 said:postal in post 133676 said:I haven't got CScot open at the moment, but Edinburgh has 21 Ground Frames. In fairness they operate differently to the Ground Frames in the Carlisle sim which are a bespoke single lever operation only found on that sim.nPerhaps you might find it easier refreshing your skills on something like Royston rather than a full-blown horror story like the 79-80 Carlisle TT. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 20:14 #133686 | |
|
mjkerr
174 posts |
postal in post 133685 said:I haven't got CScot open at the moment, but Edinburgh has 21 Ground Frames Very basic in the Windows XP version Equally, hardly used in some of the timetables Hence why I have been practicing with Carlisle Upperby Yard DELETED Log in to reply |
| Upperby Yard - runround operations 07/11/2020 at 21:42 #133687 | |
|
bill_gensheet
1314 posts |
mjkerr in post 133686 said:postal in post 133685 said:if you do decide to upgrade to the paid version of Edinburgh there's more timetables available, and I can assure you that both 1993 and the (upcoming) 1984 do use the ground frames.I haven't got CScot open at the moment, but Edinburgh has 21 Ground Frames Log in to reply |
| Upperby Yard - runround operations 08/11/2020 at 21:49 #133716 | |
|
mjkerr
174 posts |
Wow, I went all the way from start to 06:45 with just two minor mistakes Yet again, Upperby Yard was the downfall, as I knew it would be However, this time I learned and applied the Reverse Direction instruction I accidently put the CLST in the Up Through instead of Run Round, however I was following the Simplifier timetable so something must have sneeked past me! DELETED Last edited: 08/11/2020 at 21:51 by mjkerr Reason: None given Log in to reply |