Page 1 of 1
| 7X02 is fouling the points after the loco has run around the train and re-attached. 08/12/2021 at 16:07 #142816 | |
snbower
14 posts |
7X02 pulls up to signal 458 on the UGL Once the loco detaches I set a route from 458 to 504 I then set a route from signals 473 to 425 (via 449) I then set a route from signals 428 to 458 The loco attaches to the train, but as per the attached image it is fouling the points, meaning I cannot set a route into Litchurch Lane. How do I resolve this? Thanks  Post has attachments. Log in to view them. Log in to reply |
| 7X02 is fouling the points after the loco has run around the train and re-attached. 08/12/2021 at 16:55 #142817 | |
jc92
3629 posts |
Tell it to reverse direction so its facing down and it should shunt northwards behind the signal.
"We don't stop camborne wednesdays" Log in to reply |
| 7X02 is fouling the points after the loco has run around the train and re-attached. 08/12/2021 at 17:07 #142818 | |
|
snbower
14 posts |
Hi, Do you know how I can give a 'Reverse' instruction? Log in to reply |
| 7X02 is fouling the points after the loco has run around the train and re-attached. 08/12/2021 at 17:12 #142819 | |
postal
5190 posts 
|
You need to use F2 to open the Train List, find the train that you wish to reverse and right-click on the TD. This page of the Wiki then tells you what you need to do to reverse the train under the Signalling Options section.
“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Last edited: 08/12/2021 at 17:13 by postal Reason: None given Log in to reply The following user said thank you: snbower |