ARS sets route from wrong signal

You are here: Home > Forum > Simulations > Released > LTS > ARS sets route from wrong signal

Page 1 of 1

ARS sets route from wrong signal 12/04/2022 at 12:15 #146110
iainsheppard
Avatar
7 posts
Hi there

I've been playing around with creating a Sunday timetable reflecting engineering works, where trains leave the sim at Woodgrange Park and then re-enter from Bow Jn. I've created two 9Z03 services with different UIDs, and a rule so that the second only enters the sim 6/7 minutes after the first 9Z03 left. The second successfully enters, but ARS then sets a route from signal 130 rather than from 518.

Have I got my pathing wrong? (The timetable validates ok)

Thanks




Post has attachments. Log in to view them.
Log in to reply
ARS sets route from wrong signal 12/04/2022 at 13:23 #146111
madaboutrains
Avatar
307 posts
Do you need to have a path "BL" at Gasfacotury Junction for it to set properly? Had simular at Point Pleasant on Wimbledon
RIP Feltham Panel 1
Log in to reply
ARS sets route from wrong signal 12/04/2022 at 13:37 #146112
iainsheppard
Avatar
7 posts
The Path options are Gas Factory Jn are LP, ML, and XX, unfortunately. I assume LP refers to the Up Loop, but just in case it worked I tried it with Path set to LP and then XX, but no luck.

And just for completeness, there are no issues for the return service being routed from the Down Main to Bow Jn.

Thanks though.

Log in to reply
ARS sets route from wrong signal 12/04/2022 at 13:57 #146113
MarkC
Avatar
1082 posts
iainsheppard in post 146112 said:
The Path options are Gas Factory Jn are LP, ML, and XX, unfortunately. I assume LP refers to the Up Loop, but just in case it worked I tried it with Path set to LP and then XX, but no luck.

And just for completeness, there are no issues for the return service being routed from the Down Main to Bow Jn.

Thanks though.

I believe you would need the line code to be BJL for Gas Factory Jn

Log in to reply
ARS sets route from wrong signal 12/04/2022 at 14:23 #146114
iainsheppard
Avatar
7 posts
Thanks, that's sorted it.

Is that intended behaviour though? I may be mistaken, but I thought that Line was supposed to be reflective of the route out of the location, which of course BJL would not be (wrt to leaving Gas Factory Jn and heading to Fenchurch Street).

Log in to reply