Upcoming Games

(UTC times)


Full list
Add a game

Upcoming Events

No events to display

Who's Online

flabberdacks, JamesN, Tempest Malice, TUT, postal, i26 (6 users seen recently)

Crewe FAQ

You are here: Home > Forum > Simulations > Released > Crewe > Crewe FAQ

Page 2 of 5

Crewe FAQ 25/05/2023 at 11:44 #151954
HST125Scorton
Avatar
1195 posts
One final query freight booked for Crew Changes, can I use Basford Hall SSM/SSN path location or do I use other locations? CSSN Sig 34/36 etc?
Aaron (AJRO) | Timetable Writer
Log in to reply
Crewe FAQ 25/05/2023 at 11:57 #151955
Robyn
Avatar
74 posts
HST125Scorton in post 151954 said:
One final query freight booked for Crew Changes, can I use Basford Hall SSM/SSN path location or do I use other locations? CSSN Sig 34/36 etc?
For DN goods trains Basford Hall SSM/SSN suffices, the crew change will take place at NH34 or NH36 if you use that loc.

7-5-5, closing of comment
Log in to reply
The following user said thank you: HST125Scorton
Crewe FAQ 25/05/2023 at 11:58 #151956
slatteryc
Avatar
255 posts
I thought the same. The train looked like it was slowing for a warner route . The route had been set from winsford a long way in advance ( all the way to the other end of the sim) but had not cleared to green through the station ( all the others were fine). Other nonstoppers had blazed through at 80 happily on Greens.
Log in to reply
Crewe FAQ 25/05/2023 at 12:04 #151957
Steamer
Avatar
3989 posts
You didn't select the shunt exit arrow on the UF beyond the station by any chance rather than the signal?
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q)
Log in to reply
The following user said thank you: Hap
Crewe FAQ 25/05/2023 at 12:38 #151958
Meld
Avatar
1111 posts
RobJ in post 151955 said:
HST125Scorton in post 151954 said:
One final query freight booked for Crew Changes, can I use Basford Hall SSM/SSN path location or do I use other locations? CSSN Sig 34/36 etc?
For DN goods trains Basford Hall SSM/SSN suffices, the crew change will take place at NH34 or NH36 if you use that loc.
Look at your data for where crew changes take place, don't plaster them all in at Basford Hall. Different operators use different locations, GBRf use Salop Goods in both directions

Passed the age to be doing 'Spoon Feeding' !!!
Log in to reply
Crewe FAQ 25/05/2023 at 12:48 #151959
HST125Scorton
Avatar
1195 posts
Meld in post 151958 said:
RobJ in post 151955 said:
HST125Scorton in post 151954 said:
One final query freight booked for Crew Changes, can I use Basford Hall SSM/SSN path location or do I use other locations? CSSN Sig 34/36 etc?
For DN goods trains Basford Hall SSM/SSN suffices, the crew change will take place at NH34 or NH36 if you use that loc.
Look at your data for where crew changes take place, don't plaster them all in at Basford Hall. Different operators use different locations, GBRf use Salop Goods in both directions
I've got GBRf and DB Cargo all sorted that use Salop Goods. It's DRS which I think use Sig CSSN NH34/36 and NH44 for there Class 4s and some of FL.

Aaron (AJRO) | Timetable Writer
Log in to reply
Crewe FAQ 30/05/2023 at 15:02 #151982
HST125Scorton
Avatar
1195 posts
It seems that a location is missing from the timetable editor. Crewe Sig CE105 [CREW105] (also comes up as Crewe Platform 10 Virgin Trains) which is on the Down Slow before accessing the station. Only a small number of trains use this for regulating purposes. Platform 10 is at the North of the station which also baffles me how CE105 became at Platform 10 VT?

http://charlwoodhouse.co.uk/rail/liverail/full/CREW105/

Aaron (AJRO) | Timetable Writer
Last edited: 30/05/2023 at 15:12 by HST125Scorton
Reason: None given

Log in to reply
Crewe FAQ 30/05/2023 at 16:09 #151983
JamesN
Avatar
1609 posts
Online
Not sure where that site has got its mapping from, but internal systems have CREW105 as Crewe Signal CE105 as expected.

Crewe Platform 10 Virgin Trains has a TIPLOC of CREW998, but no Stannox so cannot be timetabled to; similarly Crewe Electric Loco Sidings Virgin Trains [CREW999, no STANNOX]

Mantis 38765 for missing CREW105

Log in to reply
The following user said thank you: HST125Scorton
Crewe FAQ 30/05/2023 at 17:59 #151985
GeoffM
Avatar
6378 posts
To be fair, CREW105 only existed from late 2019 onwards. BPLAN also has it listed as "Crewe Sig. CE105".
SimSig Boss
Log in to reply
Crewe FAQ 03/06/2023 at 20:53 #152060
Splodge
Avatar
720 posts
I'm using Crewe chained to Manchester South with the 2016 TT. Any train entering at Sydney Bridge via the Manchester Independents is picking up the TT for onward workings - for example 6Z07 picked up it's late night entry from Acton Bridge, and 6M10 (H14580 in the MS sim) has entered as its own Basford Hall departure (showing as UID H14580 in the F2 and train TT windows, but the TT editor shows the Basford Hall departure should be H14580A).

Similar happened earlier with one of the RHTT trains which appeared from Sandbach 24 hours early having picked up the ID for a much later train which would enter at Acton Bridge.

EDIT: Ignore this, I've just double checked the 0K89 thread and realised the TT isn't yet compatible!

There's the right way, the wrong way and the railway.
Last edited: 03/06/2023 at 20:56 by Splodge
Reason: None given

Log in to reply
Crewe FAQ 08/06/2023 at 05:55 #152106
Splodge
Avatar
720 posts
Using the latest version of Crewe, I tried to signal a freight permissively on top of another in the Gresty Green Through Siding, however GL55 would not clear despite the track circuit immediately ahead of it (although not the full route to GL9015) being clear which seems unusual behaviour for a ground signal.
There's the right way, the wrong way and the railway.
Log in to reply
Crewe FAQ 08/06/2023 at 19:29 #152109
pedroathome
Avatar
916 posts
Splodge in post 152106 said:
Using the latest version of Crewe, I tried to signal a freight permissively on top of another in the Gresty Green Through Siding, however GL55 would not clear despite the track circuit immediately ahead of it (although not the full route to GL9015) being clear which seems unusual behaviour for a ground signal.
I'm going to agree with this because of this stretch of siding being non tracked (visible from the window, hence the TCs indicated in sim)
Mantis 38802

Log in to reply
Crewe FAQ 09/06/2023 at 15:31 #152112
HST125Scorton
Avatar
1195 posts
Meld in post 151958 said:
RobJ in post 151955 said:
HST125Scorton in post 151954 said:
One final query freight booked for Crew Changes, can I use Basford Hall SSM/SSN path location or do I use other locations? CSSN Sig 34/36 etc?
For DN goods trains Basford Hall SSM/SSN suffices, the crew change will take place at NH34 or NH36 if you use that loc.
Look at your data for where crew changes take place, don't plaster them all in at Basford Hall. Different operators use different locations, GBRf use Salop Goods in both directions
I have been informed by three drivers and a controller that both Db Cargo & GB Railfreight use Basford Hall SSN/SSM for Crew Changes. Hardly any FOC use Salop Goods Jn for Crew Changes these days. Now I'm not sure when this changed over but I believe it was after 2015/16 period. So this doesn't affect the 2015 TT supplied. Just letting all know who are doing timetables for Crewe.

Aaron (AJRO) | Timetable Writer
Log in to reply
Crewe FAQ 09/06/2023 at 15:59 #152113
Splodge
Avatar
720 posts
A minor graphical anomaly since the recent update - the points (PSG54) were swung correctly before the train passed over (checked having noted this glitch before), but when the track circuits occupy they show as swung for the Chester Independent. A single left click immediately normalises the graphic (no flashing) and no further changes can be made to the point positioning whilst occupied.


Post has attachments. Log in to view them.
There's the right way, the wrong way and the railway.
Log in to reply
Crewe FAQ 09/06/2023 at 18:10 #152117
y10g9
Avatar
895 posts
Splodge in post 152113 said:
A minor graphical anomaly since the recent update - the points (PSG54) were swung correctly before the train passed over (checked having noted this glitch before), but when the track circuits occupy they show as swung for the Chester Independent. A single left click immediately normalises the graphic (no flashing) and no further changes can be made to the point positioning whilst occupied.

Mantis 38821 for the draw issue. It draws correctly on the route being set, but on TC occupation the draw error occurs

Log in to reply
Crewe FAQ 13/06/2023 at 01:36 #152142
8stewartt
Avatar
33 posts
Correct. Any northbound relief we (GBRF) do at NH34/36 on the down. Any southbound relief we do at NH10/12 on the up. The walking routes to the relief point at SG don’t exist anymore so you have to scramble through the bushes which none of us do. If we are relieving one coming from gresty through the arrivals to BH Junction we will do the relief on the foot crossing.
Log in to reply
The following users said thank you: HST125Scorton, flabberdacks
Crewe FAQ 13/06/2023 at 16:05 #152147
swiftaw
Avatar
271 posts
Is there a labelling error?

Should the bottom set be the Up Independents? (Sorry if this has been mentioned before)


Post has attachments. Log in to view them.
Log in to reply
Crewe FAQ 13/06/2023 at 16:23 #152148
HST125Scorton
Avatar
1195 posts
Would be possible to add location CSSN Sig NH10/12 to the timetable editor?, so to allow for Crew Changes etc. As mentioned above? Or it there a location for the Up Trains at Bas Hall?.
Aaron (AJRO) | Timetable Writer
Log in to reply
Crewe FAQ 13/06/2023 at 17:20 #152150
Hap
Avatar
1046 posts
swiftaw in post 152147 said:
Is there a labelling error?

Should the bottom set be the Up Independents? (Sorry if this has been mentioned before)

Ta

Mantis 38841

How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue
Log in to reply
Crewe FAQ 13/06/2023 at 17:37 #152151
Hap
Avatar
1046 posts
HST125Scorton in post 152148 said:
Would be possible to add location CSSN Sig NH10/12 to the timetable editor?, so to allow for Crew Changes etc. As mentioned above? Or it there a location for the Up Trains at Bas Hall?.
Mantis 38842 for consideration.

Ta.

How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue
Log in to reply
Crewe FAQ 14/06/2023 at 12:15 #152161
Guts
Avatar
604 posts
Since the upgrade, no descriptions appear when a train enter at Basford Hall and Crewe Carriage Sidings
Log in to reply
Crewe FAQ 14/06/2023 at 12:46 #152162
Meld
Avatar
1111 posts
Guts in post 152161 said:
Since the upgrade, no descriptions appear when a train enter at Basford Hall and Crewe Carriage Sidings
Being a bit vague here after all there are loads of entry points for Basford Hall and three for Crewe CS. Can you give more specific examples ?

Is this the updated bundled TT ? if so more specific examples please

Passed the age to be doing 'Spoon Feeding' !!!
Log in to reply
Crewe FAQ 14/06/2023 at 16:51 #152167
Guts
Avatar
604 posts
Meld in post 152162 said:
Guts in post 152161 said:
Since the upgrade, no descriptions appear when a train enter at Basford Hall and Crewe Carriage Sidings
Being a bit vague here after all there are loads of entry points for Basford Hall and three for Crewe CS. Can you give more specific examples ?

Is this the updated bundled TT ? if so more specific examples please
This is a new start up, so I used whatever timetable that's installed

Basford Hall Up Dep 2, Group D - G (Old Sdgs), Group H (New Sdgs), Crewe Carriage Shed 1, so far.

Post has attachments. Log in to view them.
Log in to reply
Crewe FAQ 14/06/2023 at 18:01 #152169
Hap
Avatar
1046 posts
I've ran through your save until about 0330 where several trains were booked to come in from the mentioned locations. I can confirm on your provided .SSG that the berths don't populate when the relevant train enters.

What I am having an issue with though, is that when I ran my own fresh start (3 times) with the same settings, I could not reproduce this behaviour at all.

Is there any other relevant information you could provide such as the game being chained, any settings that could have been changed during the game?

How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue
Log in to reply
Crewe FAQ 14/06/2023 at 19:17 #152170
Steamer
Avatar
3989 posts
What 'Scale of problems' option was selected? If you pick the higher difficulty options, you don't get TDs interposed at sidings.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q)
Log in to reply
The following user said thank you: Hap