You are here: Wiki > start > simulations > victoriacentral > TD

Table of Contents

SimSig Victoria Central
Train Describer
Victoria
North Pole Junction
Wimbledon
Shunt Signals

SimSig Victoria Central

Train Describer

Train Describer stepping generally works like everywhere else with the following differences.

Victoria

Arriving trains will always step into the "rear" berth (buffer stops end), overwriting anything already there. There are three berths per platform shown off to the right of the station area called A, B, and C. These allow the ARS (or you) to interpose more than one train per platform. The leftmost train description will show in the "front" berth and will be the one that steps out onto the running lines when a train departs. Any trains that enter and then depart Victoria on the same timetable and headcode will need their description re-interposing into the C/B/A berth otherwise *X* * will appear when the train departs. This is true to real life.

No Train Descriptions will step into any of Victoria or Battersea Pier Carriage Sidings. The user needs to keep track of trains using these sidings, especially if 2 trains are sharing one siding.

North Pole Junction

Trains which arrive from Shepherds Bush and reverse on the far side of North Pole Junction on the Down or Up West London Lines have to be manually interposed into Victoria's berths. This is because the descriptions will already have been sent to Wembley Main Line box and cannot be retrieved.

Wimbledon

Applies to 2000/2010/2014 eras only

Arriving trains into platform 10 will step into and overwrite the rear berth. Departing trains should be interposed into the front berth. No additional berths are provided here as the bay is only 4 carriages long.

Shunt Signals

Virtually all shunt signals will have associated TD stepping. The one exception is at Streatham Hill, VC160, which does not have a TD berth. Instead, train descriptions step over and beyond VC160.

Previous Contents Next

Last edited by Steamer on 11/06/2018 at 14:36