Upcoming Games

(UTC times)


Full list
Add a game

Upcoming Events

No events to display

Who's Online

Elford Loop

You are here: Home > Forum > Simulations > Released > Saltley > Elford Loop

Page 1 of 1

Elford Loop 21/11/2015 at 12:19 #77984
indian_railways_fan
Avatar
72 posts


In the above image,6M24(for Kingsbury Shunt Frame)was put into the loop by the Sim and because at that time there was heavy traffic including one train already booked to the Shunt Frame,I had applied a Reminder to the loop starter to ensure that the train did not depart from the loop till I wanted.
After some time,after getting the slot and relaxation in traffic I removed the reminder but after that the train refuses to move and the status in the train list is shown as waiting for right of way.Meanwhile,4V69 behind is scheduled to enter the loop and that too is stuck and behind it 1V71 is stuck.

Appears to be a bug which prevents the loop starter from being lowered if a reminder was applied earlier.

Khalid.

Post has attachments. Log in to view them.
Log in to reply
Elford Loop 21/11/2015 at 14:29 #77985
Finger
Avatar
220 posts
Did you try telling 4V69 to pass signal at danger? That should be as close to reality as it gets, the Elford loop can take 2 trains. You can get similar hiccups in uncontrolled (but simulated) areas occasionally.

As for your suspicion it is the reminder causing this, I don't think so. I think it's actually 6M24 giving priority to 4V69 (which can't move) that's causing the deadlock. I tried setting and re-setting the reminder and it all worked fine.

Log in to reply
Elford Loop 21/11/2015 at 21:04 #78004
postal
Avatar
5257 posts
Online
" said:


In the above image,6M24(for Kingsbury Shunt Frame)was put into the loop by the Sim and because at that time there was heavy traffic including one train already booked to the Shunt Frame,I had applied a Reminder to the loop starter to ensure that the train did not depart from the loop till I wanted.
After some time,after getting the slot and relaxation in traffic I removed the reminder but after that the train refuses to move and the status in the train list is shown as waiting for right of way.Meanwhile,4V69 behind is scheduled to enter the loop and that too is stuck and behind it 1V71 is stuck.

Appears to be a bug which prevents the loop starter from being lowered if a reminder was applied earlier.

Khalid.
Can't comment on the current release, but in the original release trains for Kingsbury which were in Elford loop would not run forward until a slot had been requested and granted for Kingsbury.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply
Elford Loop 21/11/2015 at 21:36 #78008
Finger
Avatar
220 posts
" said:
" said:


In the above image,6M24(for Kingsbury Shunt Frame)was put into the loop by the Sim and because at that time there was heavy traffic including one train already booked to the Shunt Frame,I had applied a Reminder to the loop starter to ensure that the train did not depart from the loop till I wanted.
After some time,after getting the slot and relaxation in traffic I removed the reminder but after that the train refuses to move and the status in the train list is shown as waiting for right of way.Meanwhile,4V69 behind is scheduled to enter the loop and that too is stuck and behind it 1V71 is stuck.

Appears to be a bug which prevents the loop starter from being lowered if a reminder was applied earlier.

Khalid.
Can't comment on the current release, but in the original release trains for Kingsbury which were in Elford loop would not run forward until a slot had been requested and granted for Kingsbury.
... which is the case according to the screenshot.

Log in to reply
Elford Loop 22/11/2015 at 00:35 #78011
postal
Avatar
5257 posts
Online
" said:
... which is the case according to the screenshot.
Apologies; didn't read things properly the first time.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply
Elford Loop 13/02/2016 at 08:09 #80635
dwelham313
Avatar
139 posts
I'm currently having the same trouble as the OP, I have 0Z70 recessed in Elford Loop as booked and passenger trains queuing up behind on the main line as if DY4 (Elford Loop) has already cleared back out onto the main. I (optimistically) authorised the first passenger train to pass DY6 at danger and it's run into the loop behind 0Z70!

Of note compared to the OP is that no reminders have been applied/removed anywhere and no trains in the loop or queue are destined for Kingsbury Shunt Frame. It would appear to be an ARS issue where the 'Derby ARS signaller' is setting the route out of Elford Loop immediately regardless of booked departure time. I'm running loader V4.5.8 with a timetable currently under test.

Log in to reply
Elford Loop 13/02/2016 at 11:46 #80638
Stephen Fulcher
Avatar
2074 posts
I have raised a ticket for this #15043.
Log in to reply
The following users said thank you: dwelham313, indian_railways_fan
Elford Loop 25/11/2018 at 01:40 #113532
Edgemaster
Avatar
332 posts
I've similar problems with the Elford Loop. In this save I've NOT altered the train order by applying a reminder to the loop. And neither of the stuck trains is due to enter the branch, the delays and loop departure times have just resulted in a deadlock. I've not tried to talk the class 4 train past the fringe signal.
Post has attachments. Log in to view them.
Twitter
Log in to reply
Elford Loop 25/11/2018 at 02:35 #113533
MarkC
Avatar
1105 posts
Edgemaster in post 113532 said:
I've similar problems with the Elford Loop. In this save I've NOT altered the train order by applying a reminder to the loop. And neither of the stuck trains is due to enter the branch, the delays and loop departure times have just resulted in a deadlock. I've not tried to talk the class 4 train past the fringe signal.
A quick fix to clear the deadlock is to go into F2 select 4V69 and select edit timetable select Tamworth (high level) then click on Set Current/next location and click on ok. this will allow 4V69 to bypass the loop and clear the deadlock as it will allow 4V69 and 1G90 to procede and after they have both moved along far enough 6X43 will procede itself


From what I can see the deadlock is appearing because 6X43 is wating for the other trains to pass or more specificly 1G90, but as 4V69 wants the loop it cannot move therefore a deadlock occures altering the TT for 4V69 as describe above will clear the deadlock but 1G90 will run behind it.

Log in to reply
Elford Loop 25/11/2018 at 09:21 #113534
postal
Avatar
5257 posts
Online
MarkC in post 113533 said:
From what I can see the deadlock is appearing because 6X43 is wating for the other trains to pass or more specificly 1G90, but as 4V69 wants the loop it cannot move therefore a deadlock occures altering the TT for 4V69 as describe above will clear the deadlock but 1G90 will run behind it.
The loop is 852m long so I would have thought that 6X43 and 4V69 should have double-banked in the loop (though how you would force that in the Saltley sim I don't know).

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply