Three Bridges ASC Released!

Ignore - I can't read! London Bridge is rather different to Three Bridges...

In terms of chaining I see that (at least on first appearances) East Coastway, Lancing, and Oxted all work fine, and Victoria Central and London Bridge currently refuse to work but you mentioned updates in your OP.

But what about Horsham? It provides a "Chaining Arrangements Inconsistent" error — I haven't got far enough to actually test if it works regardless though. If it doesn't currently work, will it be updated?

We must also be quite close now to simulating all current Thameslink routes, which is pretty insane!

Outstanding sim and one I have been looking forward to for a long time. Thanks so much to the developer and testers.

One query using the modern timetable and options on the down main approaching Ouse viaduct area I get some unusual aspects so thought I'd report this, see attached.

Also noting that the sim doesn't have an 90's era to match with vic central reminded me to re-find this which shows the fringe arrangements for the branch from west croydon at possibly a usable level of detail and might help. But I assume the reason an 90's era is not provided is likely some other changes elsewhere in the area that source data was not available for.

I can't seem to get the TC override of Redhill platform 0 to work. I've set the route from T502 to T482 and have then tried to right-click the P0 TC override button, but it seems to have no effect.

EDIT: Save attached.

Track Circuit Overrides
A number of locations have track circuit overrides. These provide an "are you sure?" moment for the signaller when routing from ground position shunt signals into occupied tracks. They do not need to be used for call-on routes from main aspect signals which will clear automatically once the approach control timer has elapsed.

To operate, set the route normally, over the occupied track. Right-click on the appropriate red circle to operate the override. Once that and any other conditions are met, the shunt signal will show a proceed aspect. The override will cancel automatically once the route has released, either behind the train, or by manual cancellation.

Norwood Junction platform 7 override has never worked in real life and this is simulated in SimSig.

Is the chaining option for Oxted included too? Albeit with compatible timetables required?

On opening the sim with the 2019 timetable signal T353 at Haywards Heath shows a TD greyed out looking as if the track is occupied by a service. Having checked all seeded trains there are non that do not appear as normal and in the correct locations. I have deleted the sim and reloaded from the loader but the same occurs. Is this correct or is it something which might have been deleted from the timetable but is still showing.

Geoff

Using the 2019 TT, 2O88 doesn't call wrong route when mis-routed towards Guildford from P0 at Redhill - the driver isn't so confused if routed correctly into P2 first!

Ar88 in post 120776 said:

Is the chaining option for Oxted included too? Albeit with compatible timetables required?

Oxted has already been updated for chaining.