Page 1 of 1
| Routesetting Riverside Yard to Crediton 07/01/2011 at 14:19 #2211 | |
Josie
310 posts |
Hello! I can't work out how to set the route from signal 241 (Riverside Yard) to CN2 (on the way to Crediton). Am I using the wrong signals? I can't see any other threads about it on here but I can't imagine no-one has noticed so I assume it's that I'm doing something wrong rather than something's broken! In the meantime I'm keying the points and telling the trains to pass 241 at danger, which is hassle and slow. (And we'll not talk of the mess I've just got myself into by sending a train onto the single line at Newton St Cyres while there's something already fouling the level crossing AND the points at Crediton. Sigh.) Ta, Josie Log in to reply |
| Routesetting Riverside Yard to Crediton 07/01/2011 at 14:19 #13118 | |
|
Josie
310 posts |
Hello! I can't work out how to set the route from signal 241 (Riverside Yard) to CN2 (on the way to Crediton). Am I using the wrong signals? I can't see any other threads about it on here but I can't imagine no-one has noticed so I assume it's that I'm doing something wrong rather than something's broken! In the meantime I'm keying the points and telling the trains to pass 241 at danger, which is hassle and slow. (And we'll not talk of the mess I've just got myself into by sending a train onto the single line at Newton St Cyres while there's something already fouling the level crossing AND the points at Crediton. Sigh.) Ta, Josie Log in to reply |
| Routesetting Riverside Yard to Crediton 07/01/2011 at 14:30 #13119 | |
|
UKTrainMan
1803 posts |
For reasons best known to someone else a little more knowledgeable than myself you can't set a route from Signal 241 -> Signal CN2. The only work around is to have trains enter on the other line so that Signal 141 could be used to set the route to Signal CN2. There could be an incorrect or missing route code, a bug with the simulation or it is just not a valid route in real life. This has got me wondering so I am heading to Google Maps to find out - will update in a few minutes with my findings. Hope this helps, if only somewhat. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| Routesetting Riverside Yard to Crediton 07/01/2011 at 14:38 #13120 | |
|
UKTrainMan
1803 posts |
I'm stumped. Cannot see any reason why it shouldn't work. If you want to keep moves signalled then straight ahead over Cowley Bridge Junction (upto Signal 43), reverse there to use Shunt Signal 660 to traverse the trailing points at said junction and stop at Signal DM193 / 56 then Shunt Signal 661 to CN2. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| Routesetting Riverside Yard to Crediton 07/01/2011 at 14:49 #13121 | |
|
Josie
310 posts |
How do you get trains to come in on the other line though? BLOK doesn't work and there's no separate entry point - everything so far has been set to enter at Riverside Yd North and it comes out at 241. I had considered shunting around Cowley Bridge Junction like you say, but to be honest I'm already frustrated enough with these trains that I just want to get rid of them...! Log in to reply |
| Routesetting Riverside Yard to Crediton 07/01/2011 at 15:04 #13123 | |
|
sloppyjag
480 posts |
A previous thread on this forum regarding this would suggest this was a bug which the developers were aware of and have fixed and will presumably be seen by us in the next release of the Exeter sim.
Planotransitophobic! Log in to reply |
| Routesetting Riverside Yard to Crediton 07/01/2011 at 15:08 #13124 | |
|
Josie
310 posts |
So it would - I hadn't seen that thread, thank you!
Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 19:51 #13138 | |
BarryM
2158 posts |
What version of Exeter are you using? Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 20:21 #13139 | |
|
Josie
310 posts |
v2.201, only downloaded a few weeks ago.
Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 20:43 #13140 | |
|
BarryM
2158 posts |
Josie said:I can't work out how to set the route from signal 241 (Riverside Yard) to CN2 (on the way to Crediton). Josie, it appears that trains to Crediton have to leave via the Down line entrance to the yard at signal 141. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 20:56 #13142 | |
|
Josie
310 posts |
BarryM said:Josie, it appears that trains to Crediton have to leave via the Down line entrance to the yard at signal 141.Yes, I realise that's a possible route - and the link above suggests it's a bug which is fixed in the next release - but in the meantime, how can I get trains to enter at 141? I don't think it's possible - there's no separate location for that line, it's just 'Riverside Yd North' and everything comes out at 241. I don't think there's a way to force them onto the other line. Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 21:47 #13143 | |
|
BarryM
2158 posts |
Josie said:I don't think there's a way to force them onto the other line. Josie, there is, but you need to change the timetable or abandon the timetable and shunt the train. Are you capable of doing this? If not, I suggest you run the previous version of Exeter. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 22:00 #13144 | |
|
sloppyjag
480 posts |
1. There is no way to force a train to enter from the yard at sig 141 even by editing the timetable. 2. Protecting the line and talking a train past 241 onto the branch will delay a train for what, 2 minutes? Faffing about with editing timetables and shunting the train about is unlikely to be any quicker or easier. And how many trains are we talking about? Not many. 3. I don't think anything other the version 2.201 is available publicly. Planotransitophobic! Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 22:13 #13145 | |
|
Josie
310 posts |
BarryM said:Josie, there is, but you need to change the timetable or abandon the timetable and shunt the train. At the moment I'm just keying the points and telling trains at 241 to PSAD to send them towards Crediton. What would you edit the timetable to, to make them come in at 141 instead of 241? That's what I meant by 'other line'. sloppyjag said: And how many trains are we talking about? Not many. Depends on the timetable! 1985 has a few. I was just wondering (out loud, possibly even rhetorically!) whether there was a way of blocking one line and treating it almost like a failure, so as to keep everything running smoothly under signalled moves. As you say (1.), there isn't. Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 23:07 #13146 | |
|
BarryM
2158 posts |
Josie, what timetable are you using? Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 23:18 #13147 | |
Peter Bennet
5363 posts 
|
It does appear that there is no Sim entry at 141- which begs the question should there be? Given there is a signal I'd guess there should so I'll add it if I remember. Peter I identify as half man half biscuit - crumbs! Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 23:32 #13149 | |
|
Josie
310 posts |
BarryM said:Josie, what timetable are you using? 1985 - supplied, I think, I don't remember downloading it. Peter Bennet said: It does appear that there is no Sim entry at 141- which begs the question should there be? Given there is a signal I'd guess there should so I'll add it if I remember. Great, thank you! Log in to reply |
| Routesetting Riverside Yard to Crediton 08/01/2011 at 23:43 #13150 | |
|
BarryM
2158 posts |
Peter Bennet said:It does appear that there is no Sim entry at 141- which begs the question should there be? Given there is a signal I'd guess there should so I'll add it if I remember. Peter, . You could solve the current problem by shunting from the yard to S660 then to S661 then to the branch. The problem is Timetable validation will not accept a shunt from S241 to S660 (Crawley Bridge Nth Reverse). Could you add this please? Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Routesetting Riverside Yard to Crediton 09/01/2011 at 13:50 #13153 | |
|
Peter Bennet
5363 posts
|
Have added 141 as an entry point and made both entry points subject to the "BLOK" function. The route via 660/661 is already possible, did you omit Cowely Br Jn from your timetable? Peter I identify as half man half biscuit - crumbs! Log in to reply |
| Routesetting Riverside Yard to Crediton 09/01/2011 at 15:19 #13154 | |
|
AndyG
1835 posts |
Noticed that 141-CN2 is available in the published version, but not 241-CN2.
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
| Routesetting Riverside Yard to Crediton 09/01/2011 at 21:23 #13156 | |
|
BarryM
2158 posts |
Peter Bennet said:The route via 660/661 is already possible, did you omit Cowely Br Jn from your timetable? Yes, It is possible. No. The timetable will not VALIDATE this move. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Routesetting Riverside Yard to Crediton 09/01/2011 at 22:29 #13157 | |
|
Peter Bennet
5363 posts
|
BarryM said:Peter Bennet said:OK it does now, so must have fixed it some time ago.The route via 660/661 is already possible, did you omit Cowely Br Jn from your timetable? Peter I identify as half man half biscuit - crumbs! Log in to reply |
| Re: Routesetting Riverside Yard to Crediton 08/08/2011 at 13:38 #19233 | |
|
AndyG
1835 posts |
" said:Josie said:Until the updated version is released, there is no way to enter trains on the arrival line (@ sig 141), nor is there a valid route Riverside Yd towards Crediton. Interim workaround is to manually set the points, and then instruct driver to pass the red signal 241.I don't think there's a way to force them onto the other line. I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |