Page 1 of 1
| Ex Camden Yard 1980 timetable. 21/12/2011 at 21:01 #26013 | |
leverpuller
4 posts |
Hi all Simsiggers, I have been trying to get a light engine (0M11) due at 0725 from the West End Yard to Platform 15 for 1M16 in 1980 timetable. As per the manual, obtain release 603 then set route CY43 to 116 signals, this is not taken by the frame operator. Between the many trains that arrive on the Up Fast since ringing out, I am up to 0825 and still no response in the release being taken. Hope you can shed some light on this for me, Regards Peter Log in to reply |
| Re: Ex Camden Yard 1980 timetable. 21/12/2011 at 22:35 #26017 | |
Steamer
3922 posts |
You have to operate the ground frame- Click 'Show' on the top menu bar, go down to 'Lever Frames', click 'Camden Yard (east end)'. This brings up a window with the ground frame in it. To operate the frame, move lever 42 down (to release the other levers, you will notice that the white flashing light next to 603 on the main screen becomes a solid white light), then move lever 44 down (to change the points), then move lever 43 down (to clear the signal). When the train has left (you'll see it light up the track circuits as normal), move 43 back up, then 44, then 42, right click the release button for the ground frame, and close the ground frame window. Hope this helps 
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Re: Ex Camden Yard 1980 timetable. 21/12/2011 at 23:23 #26022 | |
|
leverpuller
4 posts |
Thanks Steamer... successfull at last after 60" delay. Peter :cheer: Log in to reply |