Page 1 of 1
| Help needed with train6Z00 27/03/2011 at 17:26 #2683 | |
leg_iron
44 posts |
I have had train 6Z00 enter the area at Scunthorpe Grant Lyons and held at signal S40. The timetable for this train is shown below: Scunthorpe S45 (rev) Scunthorpe F.D I have tried to send the train to S346 and then reverse from S45 into FD but it comes up with incorrect route, i have also tried to send it via S348 but again it comes up with incorrect route. Help!! Log in to reply |
| Help needed with train6Z00 27/03/2011 at 17:26 #14433 | |
|
leg_iron
44 posts |
I have had train 6Z00 enter the area at Scunthorpe Grant Lyons and held at signal S40. The timetable for this train is shown below: Scunthorpe S45 (rev) Scunthorpe F.D I have tried to send the train to S346 and then reverse from S45 into FD but it comes up with incorrect route, i have also tried to send it via S348 but again it comes up with incorrect route. Help!! Log in to reply |
| Help needed with train6Z00 27/03/2011 at 17:40 #14435 | |
|
Rushey Platt
55 posts |
FD is not Frodingham Depot, it is the Goods (Freight) Yard. See the SBSI at http://www.SimSig.co.uk/dokuwiki/doku.php?id=usertrack:mans:shumberoperation Rob Log in to reply |
| Help needed with train6Z00 27/03/2011 at 18:16 #14440 | |
|
leg_iron
44 posts |
Thanks for that. I was getting really confused. Senior citizen moment!!
Log in to reply |
| Help needed with train6Z00 27/03/2011 at 18:38 #14442 | |
|
leg_iron
44 posts |
How am i supposed to get to the Up Goods Yard from Signal S40 (Frodinham Depot) without getting messages saying that i have set an incorrect route. I can't find the correct route.
Log in to reply |
| Help needed with train6Z00 27/03/2011 at 18:41 #14443 | |
|
leg_iron
44 posts |
I have tried to set a route to S346 then reverse from S45 into the up goods yard and still get an incorrect route. I have also tried to go via S348 and still it comes up with incorret route.
Log in to reply |
| Help needed with train6Z00 27/03/2011 at 19:37 #14449 | |
postal
5190 posts |
Just for clarification, once you have got as far as S346 and are ready to set the route from S45 into the Goods Yard, where are you clicking once you have set the cursor flashing at S45? You should see a small grey triangle above and to the left of the text for "Goods Yard". This should be the end point to set the route into the Goods Yard and works fine for me.
“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Help needed with train6Z00 27/03/2011 at 20:04 #14450 | |
|
leg_iron
44 posts |
If i set the route from S40 to S346 i get a message that there was in incorrect route set
Log in to reply |
| Help needed with train6Z00 27/03/2011 at 20:17 #14451 | |
|
leg_iron
44 posts |
I give up on this simulation
Log in to reply |
| Help needed with train6Z00 27/03/2011 at 20:32 #14452 | |
|
sloppyjag
480 posts |
postal said:Just for clarification, once you have got as far as S346 and are ready to set the route from S45 into the Goods Yard, where are you clicking once you have set the cursor flashing at S45? .I think what leg_iron is saying (and I have experienced the problem also) is that he isn't getting as far as S346 to even set a route into the Goods Yard...the driver calls reporting wrong route set when route is set from S40 to S346. I had to abandon timetable to route the train as per booked in the timetable to get it to go to S346. Planotransitophobic! Log in to reply |
| Help needed with train6Z00 27/03/2011 at 20:33 #14453 | |
|
leg_iron
44 posts |
I ended up abandoning the timetable for that train.
Log in to reply |
| Help needed with train6Z00 27/03/2011 at 20:50 #14454 | |
|
postal
5190 posts |
sloppyjag said:postal said:I was in the middle of typing a note that I had misunderstood what was being asked when your post came up!Just for clarification, once you have got as far as S346 and are ready to set the route from S45 into the Goods Yard, where are you clicking once you have set the cursor flashing at S45? .I think what leg_iron is saying (and I have experienced the problem also) is that he isn't getting as far as S346 to even set a route into the Goods Yard...the driver calls reporting wrong route set when route is set from S40 to S346. I had to abandon timetable to route the train as per booked in the timetable to get it to go to S346. I've reported it on the bug-board so that Chris Lord can take the necessary action. “In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe Log in to reply |
| Help needed with train6Z00 27/03/2011 at 21:45 #14455 | |
|
Lardybiker
771 posts |
Its a bug that's already reported and already fixed. IT will be in an update which should be released in a couple of weeks.
Log in to reply |