Slots given to include headcodes

You are here: Home > Forum > Wishlist > Features wish list > Slots given to include headcodes

Page 1 of 1

Slots given to include headcodes 13/03/2014 at 12:57 #56894
maxand
Avatar
1637 posts
I'd like to suggest that when slots are granted into sidings after telephone calls (e.g., permission to enter Merehead Quarry Arrivals in Westbury sim) the message board include the headcode, e.g., "Merehead given to XXXX". I don't use sticky notes to document permissions and if only one train is heading in that direction, it's usually no trouble. But if I am distracted and forget whether permission was granted for a particular train, all I would need to do is pull down the message list and see if permission was granted to that train, rather than ring the yard again and be told the train has (or has not) already been accepted.

It's easy to miss a "slot granted" message if it is quickly hidden by an avalanche of new messages. I have allocated a sound to slot granting, but if I have to play silently for any reason, the sound is not much help.

If I accidentally send a train to a slot without obtaining permission, I get a message " [train xxxx] did not get permission" (or something similar), so it ought to be easy enough to add a headcode to a "permission granted" message.

Log in to reply
Slots given to include headcodes 13/03/2014 at 13:21 #56895
Hugh Jampton
Avatar
69 posts
I haven't got a sim to hand as I'm at work, but isn't there already a "List Permissions Given" in one of the dropdown menus? It may not involve headcodes but does at least tell you whether a slot has been granted or not. I think I've used this feature on the Westbury sim but I can't be sure without checking it at home later.
Last edited: 13/03/2014 at 13:23 by Hugh Jampton
Log in to reply
Slots given to include headcodes 13/03/2014 at 13:22 #56896
jc92
Avatar
3626 posts
" said:
I don't use sticky notes to document permissions
forgive my conservative post, but I think you've hit the nail on the head, although I would have thought this would be a fairly simple one to implement.

I spose an alternative is to provide scratchpads more often near entry/exit points for TD's to be noted.

"We don't stop camborne wednesdays"
Log in to reply
Slots given to include headcodes 13/03/2014 at 14:04 #56897
maxand
Avatar
1637 posts
Hugh Jampton, you're right! "List permissions given" (in the Messages window) is an option on the Show menu. I hadn't noticed that. Thanks.

Nevertheless, it would be nice to see permission messages on the main Messages window include headcodes as well, as soon as they are granted.

Last edited: 13/03/2014 at 14:07 by maxand
Log in to reply
Slots given to include headcodes 13/03/2014 at 15:23 #56900
Danny252
Avatar
1461 posts
If you forgot whether you've got permission, you'd just have to phone up and ask whether you had got permission - and from memory, you'll set a suitably sarky response from the virtual man at the other end in Simsig.
Log in to reply
Slots given to include headcodes 13/03/2014 at 15:55 #56903
robert
Avatar
18 posts
As this is a simulation, then the only information we should have is the same as a real signalman gets, the slot light when the slot is given, and our memory
Log in to reply
The following user said thank you: Finger
Slots given to include headcodes 13/03/2014 at 16:02 #56905
kbarber
Avatar
1708 posts
" said:
If you forgot whether you've got permission, you'd just have to phone up and ask whether you had got permission - and from memory, you'll set a suitably sarky response from the virtual man at the other end in Simsig.

That sounds about right... together with a grumble about dragging him away from all the work he's trying to do if you'll only let him... you know, that really intense session with a cup of tea and the paper

Log in to reply
Slots given to include headcodes 14/03/2014 at 05:18 #56924
Airvan00
Avatar
129 posts
Probably the easiest way to remember is to only set the route after you obtain permission.
Route dark= something needs to be done
Route white=I already have permission

Log in to reply
Slots given to include headcodes 14/03/2014 at 07:09 #56927
Hugh Jampton
Avatar
69 posts
" said:
Probably the easiest way to remember is to only set the route after you obtain permission.
Route dark= something needs to be done
Route white=I already have permission

This works in many cases but, sometimes, it can be necessary to ring for permission well in advance of the train. Toton on the Trent simulation might be a good example, where it often seems to take ages for the shunter to grant a slot into New Bank. On the rare occasion that permission is granted quickly, the relevant train might still be near the other end of the panel and setting the route immediately would block other trains. Instead, I just put the headcode on a sticky note at the exit point :whistle:

Log in to reply
Slots given to include headcodes 14/03/2014 at 07:32 #56928
maxand
Avatar
1637 posts
robert wrote:
Quote:
As this is a simulation, then the only information we should have is the same as a real signalman gets, the slot light when the slot is given, and our memory

You can press F3 > Options > Messages > Slot request/release and check the Disable box.

Quote:
If you forgot whether you've got permission, you'd just have to phone up and ask whether you had got permission

I did actually mention that in my first post.

Log in to reply
Slots given to include headcodes 14/03/2014 at 09:07 #56931
Noisynoel
Avatar
989 posts
Of course, as this is a simulation and trying to be realistic as possible, all the signaller has to remember what permission he has been given is either his memory or a pen and paper.
Noisynoel
Log in to reply
The following users said thank you: Hooverman, DriverCurran
Slots given to include headcodes 14/03/2014 at 12:23 #56941
Hooverman
Avatar
306 posts
Where would we be at our ASC without a pen and scap paper, the most important tool we have apart from the old grey matter :-)
Log in to reply
The following user said thank you: DriverCurran
Slots given to include headcodes 14/03/2014 at 13:05 #56945
AndyG
Avatar
1830 posts
" said:
Of course, as this is a simulation and trying to be realistic as possible, all the signaller has to remember what permission he has been given is either his memory or a pen and paper.
Nothing wrong with slate and chalk either. (Victorian sticky note? :S )

I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either.
Log in to reply
Slots given to include headcodes 14/03/2014 at 14:03 #56947
Danny252
Avatar
1461 posts
" said:
Where would we be at our ASC without a pen and scap paper, the most important tool we have apart from the old grey matter :-)
I become quite concerned whenever I come across a box of any size without the mandatory pile of ripped up old notices!

Log in to reply
Slots given to include headcodes 14/03/2014 at 17:03 #56956
kbarber
Avatar
1708 posts
" said:
" said:
Of course, as this is a simulation and trying to be realistic as possible, all the signaller has to remember what permission he has been given is either his memory or a pen and paper.
Nothing wrong with slate and chalk either. (Victorian sticky note? :S )

I believe that, until the 1952 powerbox was built, signalmen at Euston used this method to indicate platform occupation

Log in to reply
The following user said thank you: BarryM