Wimbledon Query / Bug?

If my understanding is correct James the following extract from the published Wimbledon manual located at this link http://www.SimSig.co.uk/dokuwiki/doku.php?id=simulations:wimbledon:crossboundary advises

"Note that the points between the Main and Windsor side will not show locked at this juncture. Next the signaller on the receiving side needs to set a route from the red entrance triangle to the appropriate exit signal. Once both sides are locked, the points between the Main and Windsor side will call and lock"

This seems to cover the original report.

Paul

Right, here's a better description of the QTown Road oddities:

With a route set towards 117 (Down Windsor) or 119 (Up Windsor), you are unable to set a route to 7012X, the first half of the two-panel route leading onto the Down Main Fast/Slow, with the error being "No Overlap Available".

However, the interlocking will happily let you key over Points 612, manually swinging the overlap onto the crossover. In fact, you can manually set up the points all the way to 121/123 (Down Mains), set the Panel 1 half of the route, and still be told that no overlap is available - despite the overlap already being over P612, and no points anywhere in the route requiring movement!

At a glance, I can see no other cross-boundary route where the boundary points in question are within the overlap, so I think this is an isolated problem.

Setting a route from CY17 to CY43 does the same thing, one half of the points are called to reverse, but ther route set (and TC occupations) don't swing with the points. See picture.

Above we can see 2P09 crossing from 55 - 65. the speed shows 0mph. Where have a I gone wrong here?? Isn't the route set??