Page 1 of 1
| Salisbury ASC release 07/05/2015 at 19:45 #71910 | |
AndyG
1834 posts |
Please post here any queries etc relating to this release. Enjoy! I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply The following users said thank you: John, Oddjob |
| Salisbury ASC release 07/05/2015 at 21:38 #71918 | |
Steamer
3920 posts |
I notice Mr. Young has transferred to the Southern Region! What will Worksop do without him? 
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 07/05/2015 at 21:40 by Steamer Log in to reply |
| Salisbury ASC release 07/05/2015 at 21:45 #71919 | |
|
y10g9
895 posts |
It will all be fine until worksop is able to chain to sailsbury. Now what are we missing for that link to happen 
Log in to reply |
| Salisbury ASC release 07/05/2015 at 21:55 #71923 | |
Tempest Malice
122 posts |
" said:It will all be fine until Worksop is able to chain to Salisbury. Now what are we missing for that link to happen ;) Actually, just updates to Sheffield, Trent, and Gloucester; Salisbury chains to Westbury which via Bristol or SwinDid or both connects to Gloucester which with a refresh will chain to Saltley then through to Derby. Then with updated Trent and Sheffield sims that chain to each other you are actually through to Worksop. (via SwinDid, a potential Oxford sim then Marylebone and Leamington is another way to Saltley which doesn't involve Gloucester that is also possible.) Log in to reply |
| Salisbury ASC release 07/05/2015 at 22:22 #71925 | |
|
Steamer
3920 posts |
" said:" said:You don't even need Sheffield, take the Chellaston road at Stenson Jn, then pick your route from the Trent Jn complex to Mansfield, where Worksop takes over. Update to Worksop would probably be required to chain to an updated Trent.It will all be fine until Worksop is able to chain to Salisbury. Now what are we missing for that link to happen ;) "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 07/05/2015 at 22:23 by Steamer Log in to reply |
| Salisbury ASC release 07/05/2015 at 22:29 #71926 | |
|
Tempest Malice
122 posts |
Forgot about stenson junction somehow and thought you'd have to go by clay cross, but yes you're completely correct. so It's only 2 updates (not counting worksop) and 0 new sims; suprisngly few sims to connect such distant parts of the country.
Log in to reply |
| Salisbury ASC release 08/05/2015 at 04:18 #71930 | |
jc92
3629 posts |
very minor error - signal GM4 is marked with an Auto stem but is a controlled signal. really enjoying this Sim so far.
"We don't stop camborne wednesdays" Log in to reply |
| Salisbury ASC release 08/05/2015 at 14:19 #71947 | |
|
jc92
3629 posts |
running thr 1988 tt. 5O01 shows as next due from Gillingham but it picks up an ECS shunt at Salisbury rather than the correct movement. not a Major issue and I suspect more core code related than sim related. I don't quite understand the need for a replacement switch for GM28 either. surely placing the acceptance switch to normal when no train is accepted or in section achieves the same result. I'm also having trouble getting 7Z07 into West C.S. setting the route from 240 to 238 in the usual fashion instead deselects 240 as the entrance and replaces it with 238. no route can be set. "We don't stop camborne wednesdays" Last edited: 08/05/2015 at 14:25 by jc92 Log in to reply |
| Salisbury ASC release 08/05/2015 at 14:43 #71952 | |
|
AndyG
1834 posts |
" said:very minor error - signal GM4 is marked with an Auto stem but is a controlled signal. really enjoying this Sim so far.Fixed, thanks for spotting. I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Last edited: 08/05/2015 at 14:50 by AndyG Reason: added quote Log in to reply |
| Salisbury ASC release 08/05/2015 at 14:49 #71957 | |
|
AndyG
1834 posts |
" said:running thr 1988 tt. 5O01 shows as next due from Gillingham but it picks up an ECS shunt at Salisbury rather than the correct movement. not a Major issue and I suspect more core code related than sim related.1) Odd as the meesage is trigged by the pre-entry of a specific train. I'll see if it needs refining; 2) GM28 replacement switch is there as it's on real life panel, belt and braces I guess; 3) It's an era issue, fixed but needs an update issued. I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
| Salisbury ASC release 09/05/2015 at 11:55 #72004 | |
Simdmuk
153 posts |
Jc92 beat me too it with 7Z07 !. However on the same timetable..... The seed loco 0A00 is duly routed towards East Yard once shunter release has been obtained.I've noticed that the seed train 0A00 sits between sigs 215 & 212 although not visible (F2 shows it as terminated no more trips).When 0Y31 gets sent to East Yard via the through siding, it stops, calls that its waiting at sig 223. If you reverse the loco, the F2 screen then tells you that there is a train in front (0A00). Should 0A00 actually exit the sim ? It seems to me it should ,as this "blocks" 0Y31 movement to the head shunt. I ended up removing 0A00 and again, when 0Y31 reached the East Yard it just terminated but didn't exit. Log in to reply |
| Salisbury ASC release 09/05/2015 at 12:29 #72005 | |
KymriskaDraken
963 posts |
" said:Jc92 beat me too it with 7Z07 !.There is an era glitch which has broken the 1980s timetable. It's been fixed and an update will be released shortly. Log in to reply The following user said thank you: Simdmuk |
| Salisbury ASC release 09/05/2015 at 13:58 #72006 | |
lazzer
603 posts |
I just routed pilot engine SBPY out of the East Yard and onto the main line. I notice that slots A and B did not clear as the train passed signals 215 and 223, and remain lit. Is this normal and, if so, is it possible to leave the slots permanently on and shunt trains back and forth? Or will that cause issues? Should the slots be cancelling themselves?
Log in to reply |
| Salisbury ASC release 09/05/2015 at 21:54 #72017 | |
|
AndyG
1834 posts |
The Shunter Releases are as follows:- SR A - SY224 to SY216 (Up); SR B - any route to SY212 (Up); SR C - any route to SY215 (Dn). I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Last edited: 09/05/2015 at 21:55 by AndyG Log in to reply |
| Salisbury ASC release 10/05/2015 at 06:27 #72023 | |
ajax103
1104 posts |
I have a question, how do I signal a train from signal 240 into West Carriage Sidings please?
Log in to reply |
| Salisbury ASC release 10/05/2015 at 07:07 #72024 | |
|
welshdragon
315 posts |
That's a missing route, will file on MANTIS
Log in to reply The following user said thank you: ajax103 |
| Salisbury ASC release 10/05/2015 at 07:59 #72028 | |
|
KymriskaDraken
963 posts |
" said:I have a question, how do I signal a train from signal 240 into West Carriage Sidings please?This is a route that got involved in the era glitch that has already been reported. It's been fixed and an update should be released soon. Kev Log in to reply |
| Salisbury ASC release 10/05/2015 at 08:16 #72029 | |
|
lazzer
603 posts |
" said:The Shunter Releases are as follows:-That doesn't answer any of my questions ... Log in to reply |
| Salisbury ASC release 10/05/2015 at 08:28 #72031 | |
|
KymriskaDraken
963 posts |
" said:" said:If you're coming out of East Yard and onto the main line you don't need release A or B as they are for movements in the other direction. So those releases will stay lit until a train passes the right way (Up direction for A and B ).The Shunter Releases are as follows:-That doesn't answer any of my questions ... I don't think its possible for the releases to be permanently given, so you need to ask for them each time. Kev Last edited: 10/05/2015 at 08:28 by KymriskaDraken Log in to reply |
| Salisbury ASC release 10/05/2015 at 08:55 #72032 | |
|
lazzer
603 posts |
" said:" said:Am I right in thinking, therefore, that slots A and B aren't required for trains running from the HS to the reception siding, in the DOWN direction?" said:If you're coming out of East Yard and onto the main line you don't need release A or B as they are for movements in the other direction. So those releases will stay lit until a train passes the right way (Up direction for A and B ).The Shunter Releases are as follows:-That doesn't answer any of my questions ... Log in to reply |
| Salisbury ASC release 10/05/2015 at 09:11 #72033 | |
kaiwhara
584 posts |
" said:Just tested it, you need A and C to do that route. Sorry guys, I am in the business of making people wait! Log in to reply |
| Salisbury ASC release 10/05/2015 at 10:58 #72035 | |
|
lazzer
603 posts |
" said:" said:I can set a route from 223 to 231 without needing slot A. Only C needed to get from the HS to REC SDG.Just tested it, you need A and C to do that route. Log in to reply |
| Salisbury ASC release 11/05/2015 at 18:45 #72092 | |
|
francisoldfield
72 posts |
Odd question which I hope isn't me being silly. I have 1L42 and 1L46 sharing platform 6 at Salisbury as seen by my screenshot: Now platform 6 should be 180m long and the total length of the two trains currently sat in there are 46+69= 115m Now they are showing as not fitting and I have the track circuit beyond SY44 as occupied. I tried to shunt them both down to the stops tight against each other but they still don't fit. Am I going mad or is this a bug? Francis Post has attachments. Log in to view them. Log in to reply |
| Salisbury ASC release 11/05/2015 at 18:51 #72093 | |
|
Muzer
718 posts |
I seem to recall I had this issue, I think the stopping position of one of the trains was wrong. I ended up managing it by abandoning both timetables before shuting.
Log in to reply |
| Salisbury ASC release 11/05/2015 at 20:12 #72095 | |
|
francisoldfield
72 posts |
same problem in platform 2 as well which is much longer. Same length trains trying to share the platform. tried removing timetables and shunting galore and cannot get them to fit without TC spilling out past the starting signals
Log in to reply |