Page 1 of 1
|Wigton Not Holding Back Trains 18/10/2018 at 01:28 #112720|
I have just noticed that Wigton is not holding trains back after being asked to do so.
In the save, I have someone crossing at Rothery and have asked Wigton to hold trains back. At about 16:57, the user at Rothery calls to say they are clear of the crossing, and I lift the reminders applied to the crossing and signal CE346, and then I return CE346 to normal working (i.e. I release the emergency replacement). Before I have a chance to call Wigton to ask them to restore normal working, they allow 2P59 into the area (another 2P59 is already in the area and heading towards Wigton).
Also, I have a TCF between CE504 and CE501 on the Up Main at Floriston. 1M36 came to a stand at CE504 but never called in to report. Note that at the time of the save, I have contacted 1M36 and asked them to PSaD and check the line, but I still believe this to be a bug.
All the best!
Post has attachments. Log in to view them.
Log in to reply
|Wigton Not Holding Back Trains 18/10/2018 at 13:03 #112727|
Gareth, 2P59 does enter at Wigton in the save, but WN4 is held at danger and the train doesn't go past it until I ring and take the block off.
The TD does appear in the 1st APPR berth, but that's normal behavior (In real life it is interposed when Wigton gets entering section from Maryport)
"James Street, Moorfields, Liverpool Lime Street and Liverpool Central" - Opinions are my own and not those of my employer
Log in to reply
The following user said thank you: Gwasanaethau