Kings Cross 2010 Timetable

You are here: Home > Forum > Simulations > Timetables > King's Cross > Kings Cross 2010 Timetable

Page 1 of 3

Kings Cross 2010 Timetable 26/06/2010 at 23:20 #1395
Chrisrail
Avatar
384 posts 		New TT in the downloads section for you all to break. It has not been tested yet so please post any findings on this thread. I have made a few edits already. It is bsed on the actual workings of 15th April 2010. Very little freight due to Engineering on the NLL. Add on will be available soon with the engineering trains from Ferme Park.

Soon to follow will be Peterborough for the same day - 15th April 2010.

Chris
Log in to reply
Kings Cross 2010 Timetable 26/06/2010 at 23:20 #9825
Chrisrail
Avatar
384 posts 		New TT in the downloads section for you all to break. It has not been tested yet so please post any findings on this thread. I have made a few edits already. It is bsed on the actual workings of 15th April 2010. Very little freight due to Engineering on the NLL. Add on will be available soon with the engineering trains from Ferme Park.

Soon to follow will be Peterborough for the same day - 15th April 2010.

Chris
Log in to reply
Kings Cross 2010 Timetable 27/06/2010 at 09:33 #9827
mfloyd
Avatar
186 posts 		Chris,

Up to 0636 and the only major problem so far is on trains to Moorgate which have wrong traction error message. I have tried fiddling with the power types but cant resolve it - however, i'm not entirely sure what i am doing! It seems to be a generic fault on all 313s selected.
Ripley, Derbyshire
Log in to reply
Kings Cross 2010 Timetable 27/06/2010 at 11:46 #9828
Jsun
Avatar
212 posts 		Small issue, 2D88S comes out Hornsey EMU with next location Hornsey, should be FP.
The CL313s should have both 3rd rail and overhead power ticked.
Log in to reply
Kings Cross 2010 Timetable 27/06/2010 at 16:32 #9830
Chrisrail
Avatar
384 posts 		The CL313s should have both 3rd rail and overhead power ticked.

Up to 0636 and the only major problem so far is on trains to Moorgate which have wrong traction error message. I have tried fiddling with the power types but cant resolve it - however, i'm not entirely sure what i am doing! It seems to be a generic fault on all 313s selected.

Thanks Guys I have edited that in the latest version you can blame FCC Carriage Working notices for that as it is not a simple case of train A forms train B. The theory of relativity is far simpler !!!!!!!!
Log in to reply
Kings Cross 2010 Timetable 29/06/2010 at 13:40 #9837
Jsun
Avatar
212 posts 		Made little progress due to lack of time however, two 2P41s appear from Ferme splitting the Welwyn line and the HTFD line. Shouldn't there be two different headcodes since they'll be on the board at the same time. Additionally it appears these trains should reunite at STVG since they're timetabled to make the same stops later on.
Log in to reply
Kings Cross 2010 Timetable 30/06/2010 at 03:11 #9845
Jsun
Avatar
212 posts 		2F85S forms ECS 5F85S at Letchworth which doesn't depart until 2603, should be changed to 5F85 which departs at 203
Log in to reply
Kings Cross 2010 Timetable 30/06/2010 at 06:53 #9846
Jsun
Avatar
212 posts 		Looking at it again it seems 2P411 shouldn't run if 2P412 runs, however they are timetabled at the same time so it is possible for a simultaneous creation. The rule should be changed to make them mutually exclusive...that said, I like just joining the trains because it's cool. :cool:
Log in to reply
Kings Cross 2010 Timetable 01/07/2010 at 19:31 #9866
meeko
Avatar
33 posts 		5B97 departs Hornsey EMUD 01:28, arrives Hertford North 01:56. It then forms 5E97, which is scheduled to depart WGC at 02:03?
Log in to reply
Kings Cross 2010 Timetable 01/07/2010 at 20:37 #9867
Jsun
Avatar
212 posts 		6G22 enters Ferme and is then scheduled ALXP-FIN-KGX, ALXP should change to Hornsey DS2 reverse.
Additionally, and more strangely 2R01 terminates at Letchworth and runs to the CS as class 2, then reappears as class 2 on the other side of the CS to run to Royston, surely this train should just go straight through?
Log in to reply
Kings Cross 2010 Timetable 02/07/2010 at 08:52 #9869
BarryM
Avatar
2158 posts 		Jsun said:
strangely 2R01 terminates at Letchworth and runs to the CS as class 2, then reappears as class 2 on the other side of the CS to run to Royston, surely this train should just go straight through?

I think you will find that this does happen. Early morning trains run mainly for staff purposes and the layout of the CS is such to allow this move.

BarryM
Barry, Sydney, New South Wales, Australia
Log in to reply
Kings Cross 2010 Timetable 05/07/2010 at 10:13 #9917
Chrisrail
Avatar
384 posts 		2R01 Does infact go through the CS / AD Lines


53104 LETCHWRTH 05:19 05:20 0 36
53101 LETCH ADL 05:22 05:22 0 2
53004 ROYSTON 05:41 46
Log in to reply
Kings Cross 2010 Timetable 06/07/2010 at 10:43 #9927
BarryM
Avatar
2158 posts 		Jsun said:
Small issue, 2D88S comes out Hornsey EMU with next location Hornsey, should be FP.
Hi Chis,

What is the Network timetable for 2D88S? Does it leave Hornsey EMU Depot at the North End and run to Hornsey Up Sidings, reverse then cross to US to Hornsey platform? I am assuming this from the way you have produced the table for this train.

BarryM
Barry, Sydney, New South Wales, Australia
Log in to reply
Kings Cross 2010 Timetable 06/07/2010 at 14:12 #9928
Chrisrail
Avatar
384 posts 		2D88 is formed by 5D88 ex Letchworth. 2D88 from Letchworth - Kings Cross via Hertford then forms 2P43. 2D88s is just a seed service. IOndeed it should be FP as next location will amend after tomoprrow as I have a few days off
Log in to reply
Kings Cross 2010 Timetable 06/07/2010 at 14:19 #9929
Chrisrail
Avatar
384 posts 		5E97 should run straight to Hornsey EMU arrive 0232. Couls very well be a n STP working. Will have a look to check The same applies for 2P41
Log in to reply
Kings Cross 2010 Timetable 15/07/2010 at 18:02 #10087
Javelin395
Avatar
270 posts 		I too am having problems with the 313s on the Moorgate branch. I've gone into the timetable, clicked on the train types tab then adjusted all EMU 313 train types to show overhead AND 3rd rail power types. The timetable for any 313 service I've then selected at random clearly shows overhead and 3rd rail power types both ticked (but initial power has only overhead ticked).

Despite having saved these changes, when train 2K98 reaches Drayton Park it calls in reporting wrong route - no suitable traction.

Can anyone tell me what I'm doing wrong as I'd really like to have a play with this new timetable?
Log in to reply
Kings Cross 2010 Timetable 15/07/2010 at 20:51 #10093
tccb
Avatar
14 posts 		Tick 3rd rail under Initial Power as well, and then it will work.
Log in to reply
Kings Cross 2010 Timetable 22/07/2010 at 02:37 #10154
BarryM
Avatar
2158 posts 		Chris,
Noted 5E31 240m will not fit in Hornsy Emu Reversing Sidings. What are the length of these two sidings? I assume that the set goes to Bowes Park to reverse,
BarryM
Barry, Sydney, New South Wales, Australia
Log in to reply
Kings Cross 2010 Timetable 22/07/2010 at 11:12 #10157
BarryM
Avatar
2158 posts 		H Chris,
This is a great timetable. Plenty to keep you on your toes for a single player. Lots of adjustments to platforms need at Kings Cross. Here are a couple more.
Noted 2V12 (120m) divides at Welwyn City to form 2 x 120m sets.(2K24, 2K26). Should be 2 x 60m. The actual divide as shown forms 1 x 120m set and 1 x 8m set!
The same applies to 5K27 at Welwyn City. Should form 2 x 60m sets (2K27, 2K31).

BarryM
Barry, Sydney, New South Wales, Australia
Log in to reply
Kings Cross 2010 Timetable 22/07/2010 at 12:51 #10159
Chrisrail
Avatar
384 posts 		Thanks for all the feedback. A lot of the "errors" I have corrected in a version to be released soon.
Log in to reply
Kings Cross 2010 Timetable 23/07/2010 at 02:33 #10168
BarryM
Avatar
2158 posts 		BarryM said:
I have corrected in a version to be released soon.

Chris, if you need any checking before you release it, I am only too pleased to assist if required.

Barry
Barry, Sydney, New South Wales, Australia
Log in to reply
Kings Cross 2010 Timetable 26/07/2010 at 15:33 #10230
Chrisrail
Avatar
384 posts 		Thanks for that Barry I might well take you up on it
Log in to reply
Kings Cross 2010 Timetable 26/07/2010 at 16:05 #10231
AndyG
Avatar
1835 posts 		2D88S should enter from Hornsey Sdgs not Hornsey EMU, to stop at Hornsey Stn. TT doesn't step up from EMU depot.
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either.
Log in to reply
Kings Cross 2010 Timetable 27/07/2010 at 00:14 #10243
BarryM
Avatar
2158 posts 		AndyG said:
2D88S should enter from Hornsey Sdgs not Hornsey EMU, to stop at Hornsey Stn. TT doesn't step up from EMU depot.

I set it up to run from Hornsey EMU (North end) to Hornsey Sdgs, reverse (new table) to Hornsey Stn. Something different and interesting.

BarryM
Barry, Sydney, New South Wales, Australia
Log in to reply
Kings Cross 2010 Timetable 27/07/2010 at 03:30 #10248
BarryM
Avatar
2158 posts 		Chrisrail said:
Thanks for that Barry I might well take you up on it
Anytime Chris, just let me know.

I'm not sure whether your aware of the problems with 313 train lemgths in the afternoon peak period.

BarryM
Barry, Sydney, New South Wales, Australia
Log in to reply
Back