Upcoming Games

No games to display

Full list
Add a game

Upcoming Events

No events to display

Granthouse GF

You are here: Home > Forum > Simulations > Released > Edinburgh > Granthouse GF

Page 1 of 1

Granthouse GF 02/09/2010 at 22:29 #1714
Fleet Controller
Avatar
24 posts
Hi all,

I have a train (6E11) standing in the UPL at Granthouse. A L.E. (0E11) has just uncoupled from the traim and is booked to go into Granthouse Engineering Sidings before returning to Millerhill.

The problem is I cannot release the G.F. to allow 0E11 into the sidings.

I'm playing the 1993 tt.

Thanks!
Fleet Controller

Log in to reply
Granthouse GF 02/09/2010 at 22:29 #11259
Fleet Controller
Avatar
24 posts
Hi all,

I have a train (6E11) standing in the UPL at Granthouse. A L.E. (0E11) has just uncoupled from the traim and is booked to go into Granthouse Engineering Sidings before returning to Millerhill.

The problem is I cannot release the G.F. to allow 0E11 into the sidings.

I'm playing the 1993 tt.

Thanks!
Fleet Controller

Log in to reply
Granthouse GF 02/09/2010 at 23:00 #11260
UKTrainMan
Avatar
1803 posts
Have you done everything right, as it is shown here?

If so then you should also make sure that points are swung in the appropriate position(s) at Grantshouse - i.e: you'll need the points into and back out of the loop swung to their normal position, not reverse.

Hope this helps.

Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for.
Log in to reply
Granthouse GF 03/09/2010 at 13:13 #11264
GoochyB
Avatar
222 posts
UKTrainMan said:
you'll need the points into and back out of the loop swung to their normal position, not reverse.

This was the solution when I had the problem as described - the area controlled by the ground frame is then protected from the main line.

Log in to reply
Granthouse GF 04/09/2010 at 20:49 #11286
Fleet Controller
Avatar
24 posts
Cheers folks,

Putting the points on the Up Loop into normal solved the problem.

Log in to reply