Page 1 of 1
| MOCK-UP: SimSig KingsX with Platform 0 10/09/2010 at 18:59 #1740 | |
UKTrainMan
1803 posts |
Hi all. Ever wondered what SimSig KingsX might look like with Platform 0 added in? Well, allow me to show you.... Version 1 (now changed from an embedded image to a link to the image - to reduce bandwidth, especially as I've published Version 2 below). As with any mock-up, don't get your hopes up - in this case it is 'a figment of my imagination' and I may have slipped up somewhere and made a small error. My grateful thanks to one of my contacts for their assistance with this by providing me with some helpful information, without this I would not have been able to create this mock-up. Comment and/or feedback welcomed. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 10/09/2010 at 18:59 #11366 | |
|
UKTrainMan
1803 posts |
Hi all. Ever wondered what SimSig KingsX might look like with Platform 0 added in? Well, allow me to show you.... Version 1 (now changed from an embedded image to a link to the image - to reduce bandwidth, especially as I've published Version 2 below). As with any mock-up, don't get your hopes up - in this case it is 'a figment of my imagination' and I may have slipped up somewhere and made a small error. My grateful thanks to one of my contacts for their assistance with this by providing me with some helpful information, without this I would not have been able to create this mock-up. Comment and/or feedback welcomed. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 10/09/2010 at 21:25 #11369 | |
|
gayrotherham
12 posts |
platform 9 and 3/4s sorry
Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 10/09/2010 at 21:53 #11373 | |
|
UKTrainMan
1803 posts |
gayrotherham said:platform 9 and 3/4s sorryA bit off topic and that platform is purely fictional where-as SimSig is not a fictional railway signalling simulator. If you really badly wanted to see Platform 3 & 3/4s then provide me with the information I need for it and I'll create a mock-up. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 10/09/2010 at 21:58 #11374 | |
Peter Bennet
5360 posts |
It's currently between platform 8 and 9: obviously. Peter I identify as half man half biscuit - crumbs! Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 10/09/2010 at 23:11 #11375 | |
|
ozzyd9001
131 posts |
yeah and only kettles in red use it i belive???
Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 16/09/2010 at 13:00 #11509 | |
|
Frankley Junction
37 posts |
UKTrainMan said:Comment and/or feedback welcomed.This looks very intrigueing, UKTM and thanks for going to the effort of creating it, albeit in mock up form. I have come seriously unstuck on cross panel a few times in respect of what can and can't arrive and depart on each tunnel road. Tthe current scene with an island of 2 platforms OOU for rebuilding at any one time would be a very interesting scenario. I understand that once the existing 1 - 11 are rebuilt in turn, the whole lot will be renumbered 1 through 12 with existing platforms moving up a number. At that point, there will obviously be more platform capacity, but without modification to the existing layout out to Holloway South, it will be very interesting to see how this capacity can be utilised. Would the implementation of this be as per Sheffield, where you can choose which era to run the sim in, and if you went down that road, would the sim be able to encompass any other changes (down bay at Gordon Hill OOU) as well as the Plt 0 in 'modern mode'. Cheers, FJ Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 16/09/2010 at 18:09 #11525 | |
|
officer dibble
390 posts |
Nice work UKTM, Shame its not the real deal as my TT would wonderfully with that layout, ho-hum. Back to writing notes to accompany it. Regarding the closed platforms at "The Cross" for works, 2 & 3 are currently a building site. Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 17/09/2010 at 17:15 #11551 | |
|
IrishDave
51 posts |
I haven't heard any plans for renumbering; the problem is that it involves changing all the theatre indicators on the approach signals, so it counts as safety-critical signalling work (as it should), which means they're a bit reluctant to bother changing them. It would also mean re-training the drivers; learning "there's a new platform 0" is easier than "every platform's been re-numbered up one", and it's also a bit less confusing for the public in the short-term. Of course, in the long term it makes much more sense; it'll probably be done if and when King's Cross is next resignalled. I don't think the capacity will go unused, even though there's still only four tracks out to Holloway South; it means that (once all the platforms are refurbished, anyway) the East Coast trains (and, until Thameslink takes them over, the suburban trains too) can have longer to turn round and thus hopefully the service will be more reliable. Platform capacity at King's Cross in the evening peak may well be the most serious capacity constraint on the ECML: in the morning, the suburban peak is about 0800-0900, whereas the intercity peak is about 0900-1000, whereas in the evening both suburban and intercity traffic peaks between 1700-1800. As for the implementation, era-based options as in, for example, Sheffield, Bristol and Swindon A&B, would be how it's done; in addition to the platform 0 addition, there have been (as you say) changes to the bays at Gordon Hill (at one point both were out of use, I believe), as well as more recently changes to the crossovers at Hatfield (in particular, the US->UF crossover was moved about a mile south, to Marshmoor, and upgraded to a 70mph turnout). I seem to recall a previous thread on this forum discussing the possibility of incorporating the connections to Thameslink and the Hitchin flyover in the distant future when (or perhaps if!) they have been built. It's really a matter of choice on the part of the developers; they might choose to bend reality slightly and just have two eras, or they could be utterly faithful and have three or more eras. Having a random island platform closed - especially without platform 0! - would be a great scenario to add to the sim, as would the addition of platform 0 (though it might make it a bit too easy!). In the meantime we'll have to content ourselves with UKTM's great mockup. Dave Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 17/09/2010 at 19:14 #11555 | |
|
UKTrainMan
1803 posts |
Version 2 Just had to make one tiny alteration. IrishDave said: it'll probably be done if and when King's Cross is next resignalled.I think all mainline platform starter signals are now LED-style signalling, although I'm yet to observe if all signals into KingsX are also LED-style signalling. IrishDave said: I seem to recall a previous thread on this forum discussing the possibility of incorporating the connections to Thameslink and the Hitchin flyover in the distant future when (or perhaps if!) they have been built.'that thread' officer dibble said: Nice work UKTM IrishDave said: In the meantime we'll have to content ourselves with UKTM's great mockup. Frankley Junction said: This looks very intrigueing, UKTM and thanks for going to the effort of creating it, albeit in mock up form.Thanks guys. Surprisingly it wasn't so hard to do In-fact I'm finding myself wanting to do another mock-up now. Hmmmm. Frankley Junction said: Tthe current scene with an island of 2 platforms OOU for rebuilding at any one time would be a very interesting scenario. officer dibble said: Regarding the closed platforms at "The Cross" for works, 2 & 3 are currently a building site.  I'll let you guys figure out why Platform 0 has been collared in the way that it has been collared. Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 17/09/2010 at 19:27 #11557 | |
|
IrishDave
51 posts |
UKTrainMan said:Ah, yes, I seem to remember that because platform 0 is in a relatively confined space, it's electric trains only, no diesels allowed? Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 17/09/2010 at 19:34 #11559 | |
|
UKTrainMan
1803 posts |
IrishDave said:UKTrainMan said:Correct! Damn that was fast. I'll probably shed a tear if a signaller accidentally puts a Diesel train into the platform as the 'ceiling' would probably end up looking totally ruined.Ah, yes, I seem to remember that because platform 0 is in a relatively confined space, it's electric trains only, no diesels allowed? Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 19/09/2010 at 00:52 #11603 | |
|
Frankley Junction
37 posts |
UKTrainMan said:I'll let you guys figure out why Platform 0 has been collared in the way that it has been collared. Electric trains only in 0 due to restricted ventilation. Log in to reply |
| MOCK-UP: SimSig KingsX with Platform 0 19/09/2010 at 15:02 #11622 | |
|
kbarber
1712 posts |
Frankley Junction said:UKTrainMan said:I'll let you guys figure out why Platform 0 has been collared in the way that it has been collared. It's bound to happen one day though! It wasn't unknown, in the days of the previous layout, for a wrong suburban set to be sent to Moorgate. If it was too long & obstructed the loco holding siding at Moorgate that could cause a very great deal of hassle. I recall my father saying he worried that the up Talisman would end up going down the Widened Lines one morning (but as far as I've ever heard it never did). Log in to reply |
| Re: MOCK-UP: SimSig KingsX with Platform 0 10/11/2011 at 16:29 #22702 | |
|
UKTrainMan
1803 posts |
" said:IrishDave said:" said:UKTrainMan said:Correct! Damn that was fast. I'll probably shed a tear if a signaller accidentally puts a Diesel train into the platform as the 'ceiling' would probably end up looking totally ruined.Ah, yes, I seem to remember that because platform 0 is in a relatively confined space, it's electric trains only, no diesels allowed? Frankley Junction said:It has now happened!UKTrainMan said:I'll let you guys figure out why Platform 0 has been collared in the way that it has been collared. http://www.flickr.com/photos/jhunter1987/6302172868   :angry: 
Any views and / or opinions expressed by myself are from me personally and do not represent those of any company I either work for or am a consultant for. Log in to reply |
| Re: MOCK-UP: SimSig KingsX with Platform 0 10/11/2011 at 17:32 #22708 | |
jc92
3629 posts 
|
ive caught a HST off platform 0, seeems theres at least one diagrammed in daily :S
"We don't stop camborne wednesdays" Log in to reply |
| Re: MOCK-UP: SimSig KingsX with Platform 0 10/11/2011 at 18:01 #22710 | |
|
Ianno
28 posts |
" said:Version 2That isn't re-signalling. That just re-heading of the existing signalling equipment. Re-signalling involves changing/replacement of the interlocking equipment and what have you, enabling, for example, route indicators to show extra/revised values. Log in to reply |
| Re: MOCK-UP: SimSig KingsX with Platform 0 10/11/2011 at 19:08 #22717 | |
|
ralphjwchadkirk
275 posts |
UKTM: Surely you don't need to collar the platform starter signal? If you're preventing access then you only need to collar the exit triangle.
Log in to reply |
| Re: MOCK-UP: SimSig KingsX with Platform 0 10/11/2011 at 20:58 #22726 | |
ajax103
1106 posts |
" said:UKTrainMan said:Not anymore, following trials by East Coast and Network Rail - HST operated services are now authorised to use Platform 0 at Kings Cross on condition that the power car at the buffer end of Platform 0 is shut down and not restarted until 10 minutes prior to departure.I'll let you guys figure out why Platform 0 has been collared in the way that it has been collared. So you could find a Grand Central set in there, 
Log in to reply |
