Page 1 of 1
| Message Error 02/07/2011 at 05:01 #3333 | |
BarryM
2158 posts |
In modern mode, the driver of a train approaching cleared signal DT2 at Claverton (Down Trowbridge) receives an adverse change message when Bathampton Jn signal 302 is put back to stop. 302R changes but DT2 remains clear.. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Message Error 02/07/2011 at 05:01 #17127 | |
|
BarryM
2158 posts |
In modern mode, the driver of a train approaching cleared signal DT2 at Claverton (Down Trowbridge) receives an adverse change message when Bathampton Jn signal 302 is put back to stop. 302R changes but DT2 remains clear.. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Message Error 02/07/2011 at 12:58 #17145 | |
jrr
95 posts |
Bristol Simsig shows green or red only. I guess that in practice DT2 is at least 3 aspect and would therefore change from green to yellow when 302 is set back to stop (302R is irrelevant to this) - hence adverse change has happened even though not showing on Simsig display. I presume it's reflecting what the signaller actually sees on the panel, not necessarily the driver. jrr Log in to reply |
| Message Error 02/07/2011 at 13:39 #17147 | |
|
BarryM
2158 posts |
jrr said:Bristol Simsig shows green or red only. I guess that in practice DT2 is at least 3 aspect and would therefore change from green to yellow when 302 is set back to stop (302R is irrelevant to this) - hence adverse change has happened even though not showing on Simsig display. I presume it's reflecting what the signaller actually sees on the panel, not necessarily the driver. jrr, It's a Program Error. The signaler received a phone call from the driver. The driver should not have called as he did not get an adverse change of aspect. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Message Error 02/07/2011 at 22:01 #17153 | |
|
Danny252
1461 posts |
jrr said:Bristol Simsig shows green or red only.Try turning off "Panel Signals" in F3/Options. Log in to reply |
| Message Error 05/07/2011 at 21:51 #17269 | |
|
Lardybiker
771 posts |
Jrr, Danny252 is correct. If you have panel signals on all signals will only show red or green irrespective of the sim. To see the true colour, turn panel signals off.
Log in to reply |
| Message Error 05/07/2011 at 22:55 #17276 | |
|
AndyG
1835 posts |
Sig 302 is 2 aspect R/G anyway; it has 302R as a Y/G repeater(/distant).
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
| Re: Message Error 18/07/2011 at 05:20 #17927 | |
|
BarryM
2158 posts |
A similar message error occurs at Bristol Parkway when sig.110 is replaced at stop. "4Axx received an adverse change of aspect at signal DB109A" whilst 4Axx is approaching sig.DB108. Barry Barry, Sydney, New South Wales, Australia Log in to reply |