Page 1 of 1
| turntable diameters 10/12/2012 at 02:04 #39014 | |
jc92
3629 posts |
Just a quick one Does anyone know what length a turntables diameter relates to? Is it the full diameter of the table, or the maximum recommended loco diameter. I am curious as the turntable at rowsley is quoted as being 60ft diameter, but oliver cromwell fitted on just fine, despite being 68ft buffer - buffer (so about 63-64ft allowing for the wheelbase being less). "We don't stop camborne wednesdays" Log in to reply |
| turntable diameters 10/12/2012 at 03:28 #39015 | |
GeoffM
6284 posts |
It's certainly a tight fit. Unfortunately it doesn't really show the tender's wheels but the front wheels are virtually over the edge of the turntable - by that I mean the wheel is on the rail but the 9 o'clock/west edge is over. There's more than 2ft of overhang at the front end, maybe as much as 4', and probably about the same on the back. [video width=425 height=344 type=youtube]yc6LVxHt0K8[/video] SimSig Boss Log in to reply |
| turntable diameters 10/12/2012 at 08:34 #39019 | |
Signalhunter
177 posts |
I've always assumed it was the length of the rails, on the deck. There will be more than a 5 foot distance from buffers to the centre of the outer wheels. There is at least one turntable (Yeovil?) that has "extension" pieces fitted to allow even larger loco's to use it. Log in to reply |
| turntable diameters 25/12/2012 at 07:45 #39650 | |
|
John 23
173 posts |
I think the P&DSR table at Churston (ex Happy Valley at Goodrington) has extensions which enabled one of the large LMS pacifics to be turned a couple of years ago
Log in to reply The following user said thank you: Signalhunter |
| turntable diameters 26/12/2012 at 23:29 #39693 | |
|
Signalhunter
177 posts |
That's the one!
Log in to reply |
| turntable diameters 26/12/2012 at 23:44 #39695 | |
|
jc92
3629 posts |
" said:I think the P&DSR table at Churston (ex Happy Valley at Goodrington) has extensions which enabled one of the large LMS pacifics to be turned a couple of years agonot forgetting the turntable at minehead "We don't stop camborne wednesdays" Log in to reply |
| turntable diameters 27/12/2012 at 17:26 #39727 | |
headshot119
4869 posts |
" said:" said:Bit of a long way to go light engine though from Kinswear to turn aroundI think the P&DSR table at Churston (ex Happy Valley at Goodrington) has extensions which enabled one of the large LMS pacifics to be turned a couple of years agonot forgetting the turntable at minehead  
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |