Page 1 of 1
| Deganwy or Quay Level Crossing Possible Bug 02/01/2013 at 20:40 #40015 | |
AH1983
8 posts |
Not sure if this is a bug or a way for an un-observant signaller to make a mess of it! It appears its possible for the Deganwy to clear a signal through a obstructed level crossing. I know in the real world, there is no interlocking to stop this from occuring but on other sims if this occurs the route won't come off Post has attachments. Log in to view them. Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 03/01/2013 at 10:43 #40062 | |
headshot119
4869 posts |
The image appears to show both crossings as lowered and cleared, therefore I can't see an issue?
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 03/01/2013 at 11:52 #40064 | |
andyb0607
260 posts |
" said:The image appears to show both crossings as lowered and cleared, therefore I can't see an issue?Looks like the last message in the message window says crossing not clear. Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 03/01/2013 at 11:53 #40065 | |
|
AndyG
1834 posts |
" said:" said:Unless it applies to another crossing, possibly?The image appears to show both crossings as lowered and cleared, therefore I can't see an issue?Looks like the last message in the message window says crossing not clear. I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 03/01/2013 at 15:38 #40082 | |
|
Stephen Fulcher
2025 posts |
Have you tried to set a route across another level crossing after this, without first lowering that crossing? SimSig will not give you the option to press "CLR" if the crossing is obstructed, and I think the message that comes up is different. The message you have there seems to indicate another level crossing. Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 03/01/2013 at 15:45 #40084 | |
jc92
3629 posts |
" said:" said:thats the indication when attempting to clear a raised crossing. when the barriers are down and the crossing is blocked, it says "crossing blocked by road vehicle"" said:Unless it applies to another crossing, possibly?The image appears to show both crossings as lowered and cleared, therefore I can't see an issue?Looks like the last message in the message window says crossing not clear. "We don't stop camborne wednesdays" Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 03/01/2013 at 20:38 #40126 | |
|
headshot119
4869 posts |
I've just had a play with the release copy of NWC, and I can't seem to reproduce this.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 09/04/2013 at 09:32 #43216 | |
|
welshdragon
315 posts |
I get it at all crossings on the sim, Brown trousered a few drivers a few times 
Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 09/04/2013 at 12:28 #43229 | |
|
headshot119
4869 posts |
" said:I get it at all crossings on the sim, Brown trousered a few drivers a few times :unsure:Could you perhaps give a little more insight into the issue, rather than riddles? "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 09/04/2013 at 15:28 #43236 | |
|
welshdragon
315 posts |
09:40 1G30 departed from Ty Croes 2 min(s) late 09:42 Crossing not clear 09:46 Up Train Approaching Gaerwen Level Crossing 09:47 Gaerwen barriers are down 09:50 Llanfairpwll barriers are down Don't know which LX was not clear, I assume it was Ty Croes? Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 09/04/2013 at 15:55 #43238 | |
Steamer
3922 posts |
It's whichever crossing that you just attempted to clear. The button would continue to flash, the signals would stay red and that message would appear each time you press the 'clear' button.
"Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 09/04/2013 at 17:31 #43250 | |
|
Danny252
1461 posts |
Sounds far more like you're trying to set the route before lowering the crossing...
Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 10/04/2013 at 16:55 #43279 | |
|
welshdragon
315 posts |
Well no, I just tried setting a route across Deganwy while it was raised, it comes up saying: "Rourte not available" Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 10/04/2013 at 17:03 #43280 | |
|
jc92
3629 posts |
" said:Sounds far more like you're trying to set the route before lowering the crossing... " said: Well no, I just tried setting a route across Deganwy while it was raised, it comes up saying:so exactly what danny has just said? makes sense - if the crossing hasnt been dropped and locked, the locking lever wont go back into the frame and wont release the signal lever protecting the crossing (assuming deganwy still has a frame?) equally a panel wont allow a route to be set across an open crossing unless it has a certain peice of kit (aspect level locking?). "We don't stop camborne wednesdays" Last edited: 10/04/2013 at 17:06 by jc92 Log in to reply |
| Deganwy or Quay Level Crossing Possible Bug 10/04/2013 at 18:48 #43291 | |
|
headshot119
4869 posts |
" said:" said:Attempting to set a route across Deganwy crossing on the down road, will give "Route Not Available", trying to set a route across it in the up will give "Crossing Not Clear".Sounds far more like you're trying to set the route before lowering the crossing... Two different messages due to the interaction with the block on the down road and not the up road. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |