Page 1 of 1
| Some questions 05/02/2014 at 20:19 #55077 | |
belly buster
368 posts |
Is there a way to show the signal numbers on the layout, or any way to interrogate it on the SIM. Or maybe another way of putting it if it says 1A00 is stopped at signal 123, can I locate either 1A00 or signal 123 quickly without scanning the full layout. What do the little yellow triangles do that are on the end of some of the platforms. Sometime ARS trains on the up slow gets stuck at 532 saying it can't route to Victoria platform 9. What's happening here? Thanks! Log in to reply |
| Some questions 05/02/2014 at 20:37 #55079 | |
TimTamToe
655 posts |
" said:Is there a way to show the signal numbers on the layout, or any way to interrogate it on the SIM. Or maybe another way of putting it if it says 1A00 is stopped at signal 123, can I locate either 1A00 or signal 123 quickly without scanning the full layout.If you look on Victoria Central's wiki page there is a signal diagram that Steamer has done that you can print. Will try and find the link later...should still be on recent changes part of wiki atm. http://www.SimSig.co.uk/dokuwiki/doku.php?id=usertrack:mans:victoriac:reference Gareth Last edited: 05/02/2014 at 20:41 by TimTamToe Reason: added link Log in to reply The following user said thank you: belly buster |
| Some questions 05/02/2014 at 20:46 #55080 | |
|
Jan
889 posts |
" said:Is there a way to show the signal numbers on the layout, or any way to interrogate it on the SIM. Or maybe another way of putting it if it says 1A00 is stopped at signal 123, can I locate either 1A00 or signal 123 quickly without scanning the full layout. There are either the diagrams mentioned by TimTamToe, or else the F2 train list will tell both you the location of the train in terms of stations/junctions - which should be easier to pick up than some random signal numbers - as well as - since the recent update - the panel the train is on. " said: What do the little yellow triangles do that are on the end of some of the platforms. They're for setting a warner route with a reduced overlap. " said: Sometime ARS trains on the up slow gets stuck at 532 saying it can't route to Victoria platform 9. What's happening here? Could you post the exact ARS routesetting status? Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Last edited: 05/02/2014 at 20:52 by Jan Log in to reply The following user said thank you: belly buster |
| Some questions 05/02/2014 at 21:00 #55081 | |
|
belly buster
368 posts |
Quote:Thanks for the other answers. The status is "2R17 Waiting for route R532G1M to become available" and the timetable is 08:58 2R17 Location Arr Dep/Pass Pth Plt Lin Activites 08:58 Victoria (Central) 08:35 08:35 9 DR:2Y81 N:2E16 Last edited: 05/02/2014 at 21:00 by belly buster Log in to reply |
| Some questions 05/02/2014 at 21:08 #55082 | |
|
TimTamToe
655 posts |
" said:Quote:Cheers Jan, missed the bit about locating just scanned and saw signal numbers so yeah also f2.Thanks for the other answers. The message waiting for route available can be because another train may need the path before 2r17 for example if it is slightly early etc. Gareth Last edited: 05/02/2014 at 21:09 by TimTamToe Log in to reply The following user said thank you: belly buster |
| Some questions 05/02/2014 at 21:42 #55083 | |
|
belly buster
368 posts |
" said:" said:Hmm but on my example it is over 20 mins late already and honestly it just sits there.Quote:Cheers Jan, missed the bit about locating just scanned and saw signal numbers so yeah also f2.Thanks for the other answers. Log in to reply |
| Some questions 05/02/2014 at 21:44 #55085 | |
Steamer
3922 posts |
" said:Is the platform occupied? Alternatively, ARS could just have tied itself in knots- it happens from time to time. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Some questions 05/02/2014 at 22:24 #55088 | |
|
belly buster
368 posts |
" said:" said:Yes it was occupied but still room for the arriving train. Would that make a difference?Is the platform occupied? Alternatively, ARS could just have tied itself in knots- it happens from time to time. Log in to reply |
| Some questions 05/02/2014 at 22:35 #55089 | |
headshot119
4869 posts |
The ARS message tells me it is waiting for the main aspect route to be available. (Denoted by the 'M' at the end of the route code) ARS doesn't always set call on routes.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply The following user said thank you: belly buster |
| Some questions 05/02/2014 at 23:58 #55091 | |
GeoffM
6282 posts |
" said:" said:It won't signal a train in to an occupied platform unless the "platform share" association is in the timetable, and the referenced train is the only one in that platform." said:Yes it was occupied but still room for the arriving train. Would that make a difference?Is the platform occupied? Alternatively, ARS could just have tied itself in knots- it happens from time to time. " said: The ARS message tells me it is waiting for the main aspect route to be available. (Denoted by the 'M' at the end of the route code) ARS doesn't always set call on routes.It can change its mind and later select a call-on or warner route as appropriate. SimSig Boss Log in to reply The following user said thank you: belly buster |
| Some questions 06/02/2014 at 04:58 #55092 | |
Guts
586 posts |
Does VicCen chain to East Croydon (Three Bridges)??
Log in to reply |
| Some questions 06/02/2014 at 13:47 #55102 | |
outofsection
149 posts |
I would think highly unlikely at present as East Croydon (beta) AFAIAA is not a Loader sim, but both Victoria sims are. If East Croydon were to come out of beta as a Loader sim, then I'd think there's a good chance they can be chained. Log in to reply |
| Some questions 06/02/2014 at 15:58 #55109 | |
|
Noisynoel
989 posts |
That is correct, at present you are unable to chain East Croydon to Victoria Central.
Noisynoel Log in to reply |
| Some questions 06/02/2014 at 23:07 #55137 | |
|
clive
2738 posts |
" said:I would think highly unlikely at present as East Croydon (beta) AFAIAA is not a Loader sim, but both Victoria sims are.Whether something is a loader sim or an older sim doesn't affect how chaining works. All that is required is that the chaining data is present. I suspect that East Croydon doesn't have chaining data for Victoria. Log in to reply |
| Some questions 06/02/2014 at 23:10 #55139 | |
|
Sacro
1171 posts |
" said:" said:However the network protocol has changed (twice I think?), so even if it has the chaining data, if it's too old a build they won't talk.I would think highly unlikely at present as East Croydon (beta) AFAIAA is not a Loader sim, but both Victoria sims are.Whether something is a loader sim or an older sim doesn't affect how chaining works. All that is required is that the chaining data is present. Log in to reply |
| Some questions 07/02/2014 at 07:34 #55147 | |
|
clive
2738 posts |
" said:Since we moved to port 50505, I think all protocol changes for chaining have been upwards compatible. Log in to reply |
| Some questions 10/02/2014 at 13:47 #55359 | |
|
Guts
586 posts |
Ummmm, so is that a yes or a no?? LOL
Log in to reply |
| Some questions 10/02/2014 at 13:58 #55361 | |
|
AndyG
1834 posts |
Presumably S Croydon predates VC so much so that it won't have provision build in.
I can only help one person a day. Today's not your day. Tomorrow doesn't look too good either. Log in to reply |
| Some questions 10/02/2014 at 21:55 #55374 | |
|
belly buster
368 posts |
Here's another question. If I want to do an untimetabled move of a train into a siding to, say, prevent blocking a through line. What is the best procedure? Thanks. Log in to reply |
| Some questions 10/02/2014 at 21:58 #55375 | |
|
John
884 posts |
You can just abandon the timetable, but be aware, depending on the location, the train might drop out of the sim never to return.
Last edited: 10/02/2014 at 21:59 by John Log in to reply The following user said thank you: belly buster |
| Some questions 11/02/2014 at 02:25 #55392 | |
|
Hawk777
386 posts |
Indeed that can be a problem. In my experience, most of the time, if a siding appears to just roll off into nothingness (e.g. non-track-circuited sidings are two parallel thin lines, which would just end), then trains will usually disappear. On the other hand, if the siding looks like it has definite stops at the end (e.g. a little grey rectangle closing off the end of the track), then that usually means the trains will not disappear. For example, in Exeter, trains don’t disappear in New Yard (even in the headshunt), but they do disappear in Riverside Yard; New Yard headshunt has a little grey rectangle representing the buffer stops, while Riverside Yard doesn’t—it looks exactly like what it is, a black hole for trains.
Log in to reply |
| Some questions 11/02/2014 at 02:27 #55393 | |
|
Stephen Fulcher
2025 posts |
The grey triangle is actually the exit arrow you use to signal the train. The stop block is identified by the bar 90 degrees to the direction of the track, which appears the same as an overlap symbol. Log in to reply |