Page 1 of 1
| Sim Speed 12/07/2014 at 09:43 #62690 | |
njimiller
138 posts |
Hi all - I hope that one day the minimum speed of sim operation will be reduced further but until or if that happens - do any of you know of a way to slow the internal time of a computer so that by running slower the minimum speed of a sim would also be slower? As always - any thoughts appreciated. Nick Log in to reply |
| Sim Speed 12/07/2014 at 10:11 #62691 | |
belly buster
368 posts |
Just pause it from time to time?
Log in to reply |
| Sim Speed 12/07/2014 at 10:48 #62693 | |
|
welshdragon
315 posts |
Like Belly Buster has said, you can pause a sim from time to time to signal routes. Leave as many routes as you dare in Auto, but remember you need to cancel routes as early as possible when a train wants a different route. Finally, use the Overview screen to show you a miniature version of the sin, you can click on that to move quickly from area to area. I hope this helps. If you're really struggling with a sim in particular then you should try another one. Log in to reply |
| Sim Speed 12/07/2014 at 11:45 #62694 | |
|
njimiller
138 posts |
Hi - don't worry I'm not struggling. I'm currently running West Hampstead and Victoria Eastern chained (without ARS) I can just about manage it but want to add Vic Central. Crazy I know but I'd do it if I could get them to run slower! Nick. Log in to reply |
| Sim Speed 12/07/2014 at 12:59 #62695 | |
|
maxand
1637 posts |
Nick, how many screens (computer monitors) are there in your setup? The more one has, the easier it is to run wide layouts as one doesn't have to keep jumping back and forth. It also pays to take the time to discover how much one can accomplish while the sim is paused. It surprised me. I seldom play at slower than 1:1 speed now as everything happens so much more slowly (and less realistically) I fall asleep. I find it more satisfying to pause the sim more frequently, and for longer, than slow it down. However, I haven't yet chained sims. Last edited: 12/07/2014 at 13:00 by maxand Log in to reply |
| Sim Speed 12/07/2014 at 15:05 #62699 | |
|
TimTamToe
656 posts |
" said:Nick, how many screens (computer monitors) are there in your setup? The more one has, the easier it is to run wide layouts as one doesn't have to keep jumping back and forth.There is no way you could fall asleep controlling W Hampstead and Vic Central and Eastern even with the speed turned right down...chaining these 3 sims Max it would also be down to volume of trains not just fitting on to screens. Vic Central alone has over 2000. Nick I take my hat off to you with your efforts so far. Next you'll be saying you run them with failures on too Gareth Log in to reply |
| Sim Speed 12/07/2014 at 15:17 #62700 | |
|
njimiller
138 posts |
Just the one screen (maxand) - basically sweep from left to right on one then click the other sim and do a sweep on that one and repeat - but definitely no failures! (TimTamToe) I'd just like to slow it down a little so I get a bit more thinking time - of course I can pause and sometimes do. The idea that with an even slower speed I could add Vic Central then signal all the way from Sutton to Bedford has considerable appeal. Nick Log in to reply |
| Sim Speed 12/07/2014 at 20:30 #62722 | |
|
TimTamToe
656 posts |
" said:Just the one screen (maxand) - basically sweep from left to right on one then click the other sim and do a sweep on that one and repeat - but definitely no failures! (TimTamToe) I'd just like to slow it down a little so I get a bit more thinking time - of course I can pause and sometimes do. The idea that with an even slower speed I could add Vic Central then signal all the way from Sutton to Bedford has considerable appeal.Yeah that's what I do, scan left to right (or right to left lol) and repeat and depending on the sim slow it down slightly during the peaks (eg for Vic C) when not on ARS. Phew no failures otherwise you'd be some sort of signalling alien lol. I can definitely see the appeal in chaining all 3 and trying single handed and see if you can keep FCC trains on time when FCC can't themselves lol Log in to reply |
| Sim Speed 12/07/2014 at 21:12 #62728 | |
|
njimiller
138 posts |
That's exactly it. I like to see a train to its destination if possible rather than give a whole pile of woe to another signaller down the track. Marylebone, Kings Cross and Exeter are good for a high percentage of in-sim starting and terminating trains.
Log in to reply |