Page 1 of 1
| 4M98 and runround at Garston!!!! 15/03/2016 at 10:39 #81194 | |
Giantray
330 posts |
Help totally confused as to how to perform 0M98 runaround 4M98. I signaled 4M98 onto the Arr Sdg at Church Road as per Timetable as 4M98 put in waiting Signal at SE207 on the Down Goods Loop. Once 4M98 arrived on the Arr Sdg, 0M98 split off then put in waiting signal. I already had a slot for 4M98 to enter Garston FLT which I presume 0M98 had taken. How do I now complete the runaround? I tried everything I could. No doubt I have overlooked something really simple. Retired Professional Railwayman (1981-2023); Pway & S&T (1981-88); Former Signalman/Signaller/ Signalling Trainer (1989-2023) [AB, TCB, Mechanical, NX, WestCad, Hitachi SARS]; Railway Historian (esp.SER, LCDR); Member of The Permanent Way Institution.. Log in to reply |
| 4M98 and runround at Garston!!!! 15/03/2016 at 11:21 #81197 | |
jc92
3629 posts 
|
Have you "cleared" the stop board with the appropriate button?
"We don't stop camborne wednesdays" Log in to reply The following user said thank you: Giantray |
| 4M98 and runround at Garston!!!! 15/03/2016 at 15:55 #81211 | |
|
Giantray
330 posts |
Yes 0M98 went into the terminal, but couldn't work out how to get it back out and around 4M98
Retired Professional Railwayman (1981-2023); Pway & S&T (1981-88); Former Signalman/Signaller/ Signalling Trainer (1989-2023) [AB, TCB, Mechanical, NX, WestCad, Hitachi SARS]; Railway Historian (esp.SER, LCDR); Member of The Permanent Way Institution.. Log in to reply |
| 4M98 and runround at Garston!!!! 15/03/2016 at 16:20 #81214 | |
Steamer
3922 posts |
" said:Yes 0M98 went into the terminal, but couldn't work out how to get it back out and around 4M98Has it re-appeared? If so, click the stop board at the siding exit, then click signal SE306 or SE402 as appropriate. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply The following users said thank you: Giantray, Coolah |
| 4M98 and runround at Garston!!!! 16/03/2016 at 10:11 #81226 | |
|
Giantray
330 posts |
Thanks guys, got there after several restarts. Thankfully I had saved the sim just before 4M98 had arrived. So after several attempts I worked it out with your help. Didn't realise I had to set routes from Stop Boards to Sidings that were under the control of a Shunter, wouldn't happen in real life, only the Shunter could authorise a movement passed a Stop Board into their area.
Retired Professional Railwayman (1981-2023); Pway & S&T (1981-88); Former Signalman/Signaller/ Signalling Trainer (1989-2023) [AB, TCB, Mechanical, NX, WestCad, Hitachi SARS]; Railway Historian (esp.SER, LCDR); Member of The Permanent Way Institution.. Log in to reply The following user said thank you: Slash |