Page 4 of 5
| Tyneside Bugs 03/09/2016 at 02:27 #84477 | |
BarryM
2158 posts |
" said:Non-stoppers Baz?So I found out. Thanks Steve. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Tyneside Bugs 03/09/2016 at 10:44 #84479 | |
Kage
65 posts |
I've got 6X52 entering and reentering as non-ARS, and cannot be made ARS, and no idea why.
Log in to reply |
| Tyneside Bugs 03/09/2016 at 11:12 #84480 | |
|
MarkC
1089 posts |
" said:I've got 6X52 entering and reentering as non-ARS, and cannot be made ARS, and no idea why.In real Life X coded trains are special trains and from what little I know are not ARS enabled, this is down to that X coded trains can usually be "out of guage". GNER's white roses used 1Xnn as it was of unusually long length. I belive SimSig has been coded/programed to react in the same manner as real life X coded trains to add to realism. please note I got this information from 'Wikipedia', aticale can be found Here Last edited: 03/09/2016 at 11:13 by MarkC Log in to reply |
| Tyneside Bugs 03/09/2016 at 14:11 #84484 | |
headshot119
4869 posts |
" said:I've got 6X52 entering and reentering as non-ARS, and cannot be made ARS, and no idea why.X in a headcode means "out of gauge" in real life ARS won't handle X trains, and SimSig replicates this behaviour. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Last edited: 03/09/2016 at 14:13 by headshot119 Log in to reply |
| Tyneside Bugs 03/09/2016 at 15:10 #84486 | |
Splodge
702 posts |
5N25 (Sunderland-Pelaw) will not move fully into the Up Goods Loop and sits fouling the main line. It stops at T5319 even though the signal is cleared.
There's the right way, the wrong way and the railway. Log in to reply |
| Tyneside Bugs 03/09/2016 at 15:28 #84487 | |
|
Splodge
702 posts |
Similarly, 6H90 in the DGL fouls the down line when 0H90 joins the rear.
There's the right way, the wrong way and the railway. Log in to reply |
| Tyneside Bugs 03/09/2016 at 17:18 #84489 | |
Steamer
3922 posts |
" said:5N25 (Sunderland-Pelaw) will not move fully into the Up Goods Loop and sits fouling the main line. It stops at T5319 even though the signal is cleared.Tested and confirmed, Mantis 15724 applies. Quote: Similarly, 6H90 in the DGL fouls the down line when 0H90 joins the rear.Noted elsewhere on the forum. Take 30m off the train length before the loco re-attaches as a short-term fix. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |
| Tyneside Bugs 03/09/2016 at 22:09 #84496 | |
|
BarryM
2158 posts |
" said:" said:Or, abandon timetable, reverse the train. Once clear, reverse and reinstate the timetable.5N25 (Sunderland-Pelaw) will not move fully into the Up Goods Loop and sits fouling the main line. It stops at T5319 even though the signal is cleared.Tested and confirmed, Mantis 15724 applies. Barry Barry, Sydney, New South Wales, Australia Log in to reply |
| Tyneside Bugs 04/09/2016 at 01:40 #84499 | |
GeoffM
6284 posts |
Or just shunt the wagons forward while the loco is separate. I have sent a query to NR over this train because TRUST says it's too long for the loop (and loop length verified by Google Earth and scheme plans). I suspect the answer is something like "yes it does hang out when running around, and this* is how we deal with it". * being an answer I hope to receive. Regarding nXnn trains, yes, ARS does not route them in real life because they are either out of gauge or otherwise need special handling. However, if you find a suitable train that has the same routing and similar timings (in terms of location to location running times, not clock times) then you can "run to special timing pattern" with that train's ID. SimSig Boss Log in to reply |
| Tyneside Bugs 05/09/2016 at 01:20 #84515 | |
|
Kage
65 posts |
I figured the X had something to do with it, just not sure why 6X52 is an X, it seems normal otherwise, just to add interest I guess?
Log in to reply |
| Tyneside Bugs 05/09/2016 at 02:32 #84516 | |
|
GeoffM
6284 posts |
" said:I figured the X had something to do with it, just not sure why 6X52 is an X, it seems normal otherwise, just to add interest I guess?That's the headcode in the timetable - we didn't make it up! Hopefully somebody will know why it needs special handling. SimSig Boss Log in to reply |
| Tyneside Bugs 05/09/2016 at 09:17 #84518 | |
|
Danny252
1461 posts |
6X52 sometimes includes car carriers from Portbury, and I've heard of car carriers using "X" headcodes elsewhere due to concerns about vandalism if the train were stopped in certain areas.
Last edited: 05/09/2016 at 09:19 by Danny252 Log in to reply |
| Tyneside Bugs 05/09/2016 at 11:26 #84526 | |
|
headshot119
4869 posts |
" said:6X52 sometimes includes car carriers from Portbury, and I've heard of car carriers using "X" headcodes elsewhere due to concerns about vandalism if the train were stopped in certain areas.I've also been told that the roof bars on certain makes / models make them out of gauge for some areas. "Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer Log in to reply |
| Tyneside Issues 05/09/2016 at 19:58 #84533 | |
|
007JamesBond
13 posts |
I notice that the front page hasn't been updated and still shows York as the latest sim that's been released. I only found out through the forums. Would you perhaps want people to know about it? (if I offended anybody then I can only apologise, I didn't mean it like that)
Last edited: 05/09/2016 at 19:59 by 007JamesBond Log in to reply The following user said thank you: uboat |
| Tyneside Bugs 07/09/2016 at 18:29 #84565 | |
ajax103
1106 posts |
" said:" said:I've got Version 1.1 and every train be it a National Rail service or a Nexus service, the ARS pops up the message saying it's a non stop service, this can't be right surely? I might as well just leave the barriers down, lol!Strange happenings with East Bolden CCTV. Some trains activate the lowering of the barriers. Has anybody noted this?In Version 1.0 the ARS was setting all trains as Non Stop. Also does anyone know the length of North Road Goods Loop and Durham Up Passenger Loop please as this isn't in the wiki yet 
Log in to reply |
| repeat of ACOA bug 07/09/2016 at 19:09 #84569 | |
Tempest Malice
122 posts |
" said:Somehow the leading (or middle) digit 1 fell off the sign.I've noticed a similar problem at aycliffe crossovers on the down. Track circuit TAPW (I think) seems to have a limit of 50 on the main straight ahead route, along the down main. (arrow fell off the sign for the simbids limit?) Log in to reply |
| repeat of ACOA bug 07/09/2016 at 20:02 #84570 | |
|
Jan
889 posts |
Indeed, logged it on the bug board (#15747).
Two million people attempt to use Birmingham's magnificent rail network every year, with just over a million of them managing to get further than Smethwick. Log in to reply |
| Tyneside Bugs 07/09/2016 at 20:14 #84571 | |
|
chrisdmadd
226 posts |
Tried routing a metro into S1 at sunderland (Timetabled) and it said wrong route unsuitable traction. These are designed for metros! Log in to reply |
| Tyneside Bugs 07/09/2016 at 22:20 #84574 | |
belly buster
368 posts |
" said:Tried routing a metro into S1 at sunderland (Timetabled) and it said wrong route unsuitable traction.Map shows S2 is electrified but not S1. http://www.SimSig.co.uk/dokuwiki/lib/exe/fetch.php?media=simulations:tyneside:tyneside_-_electrification.png Log in to reply The following user said thank you: chrisdmadd |
| Tyneside Bugs 07/09/2016 at 22:36 #84575 | |
|
chrisdmadd
226 posts |
So it is. Typical.
Log in to reply |
| Tyneside Bugs 08/09/2016 at 06:42 #84579 | |
|
NorthSig
27 posts |
In the TT editor, the location 'Boldon West Jn' has an incorrect spelling of 'Bolden'. Also F452 signal (Norton branch) is incorrectly depicted as a repeater. Log in to reply |
| Tyneside Bugs 10/09/2016 at 14:10 #84658 | |
|
ajax103
1106 posts |
Question is a Class 142 cleared between Sunderland and South Hylton at all as I was under the impression that only Metro rolling stock was cleared - only reason I ask is because I just had 2N18 10:45 Hexham - Middlesbrough (NT 2/142) approaching Signal 6222 and the ARS stated the wrong route was chosen so the train went Non ARS. The only issue with this being that I had ensured the route was set towards Seaham as the train was heading towards Middlesbrough and the correct platform at Sunderland was chosen so why would the ARS say this? Before anyone comments, I am aware that the ARS as in real life is not 100% faultless! Log in to reply |
| Tyneside Bugs 10/09/2016 at 15:36 #84659 | |
|
Steamer
3922 posts |
" said:Question is a Class 142 cleared between Sunderland and South Hylton at all as I was under the impression that only Metro rolling stock was cleared - only reason I ask is because I just had 2N18 10:45 Hexham - Middlesbrough (NT 2/142) approaching Signal 6222 and the ARS stated the wrong route was chosen so the train went Non ARS.Which version of the simulation are you using? Tested in 1.1 and cannot reproduce. 142s haven't been considered for clearance on that route according to the Sectional Appendix, and in any case non-Metro trains are generally prohibited from the branch. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 10/09/2016 at 15:42 by Steamer Log in to reply |
| Tyneside Bugs 10/09/2016 at 21:25 #84673 | |
|
chrisdmadd
226 posts |
1N78 missing off Tyneside Timetable, YORK - MIDDLESBOROUGH (VIA DARLINGTON)
Log in to reply |
| Tyneside Bugs 10/09/2016 at 22:06 #84676 | |
|
chrisdmadd
226 posts |
also when chained with york the TT on york never changes from Darlington south junction. Maybe one for york not here....
Log in to reply |
