Upcoming Games


Full list
Add a game

Upcoming Events

Sydney North FAQ

You are here: Home > Forum > Simulations > Australian Sims > Sydney North > Sydney North FAQ

Page 1 of 1

Sydney North FAQ 20/06/2022 at 20:08 #146890
headshot119
Avatar
4426 posts
Online
Sydney North Frequently Asked Questions

Do you think you've found a bug? Or do you have a problem running the simulation, check through this thread first.

Remember timetables are dealt with in the relevant timetable thread.

"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Log in to reply
Sydney North FAQ 22/06/2022 at 03:14 #146912
Jsun
Avatar
200 posts
Possible bug at Berowa with conflicting overlap.

Scenario is a train arriving into P2, key points 53 to reverse so that the derail is set and the points line to P3. You can now clear the signal out of P3 despite the overlap being used by P2. Not sure if the overlap displayed should be shortened or the points change not allowed?




Post has attachments. Log in to view them.
Log in to reply
Sydney North FAQ 22/06/2022 at 04:18 #146914
flabberdacks
Avatar
425 posts
Shouldn't be able to set the route into or out of 3 until that train has come to a stand in platform 2 and a time release has been achieved.

I see that I can reverse the points in your save, but I'm unable to reproduce it in a new game.

Is this happening for every train, Jsun? Or did you do something different with this train, that ended in this result?

Log in to reply
Sydney North FAQ 23/06/2022 at 02:31 #146926
Jsun
Avatar
200 posts
I have since retried and cannot repeat this move after the passage of the trains in the save. It does replicate loading from before. I did cancel the signal in P2 to perform the overtake, maybe that has to do with it? Unable to test this for a while.
Log in to reply
Sydney North FAQ 23/06/2022 at 12:09 #146935
flabberdacks
Avatar
425 posts
I've given it another attempt and am still unable to replicate it, I'm afraid.

If it happens again, and you're able to write steps which lead to that result each time, I'll definitely have another look at it.

Log in to reply
Sydney North FAQ 26/06/2022 at 21:45 #146988
stighetl
Avatar
94 posts
Why are some trains entering area non-ARS?

786B entered the area non-ARS, and it couldn't be made ARS.

The train is a Waratah EMU A set [8], so not a freight train.
162C is also a EMU A Set [8] Waratah, but this train is ARS.

Is this a bug, or is there a reason some trains are not ARS? (Except freight of course)

EDIT:
I sent 786B (Non-ARS) into 2UP and made it into 186A, which is now ARS. Weird.

- Stig
Last edited: 26/06/2022 at 21:53 by stighetl
Reason: None given

Log in to reply
Sydney North FAQ 26/06/2022 at 21:54 #146989
headshot119
Avatar
4426 posts
Online
stighetl in post 146988 said:
Why are some trains entering area non-ARS?

786B entered the area non-ARS, and it couldn't be made ARS.

The train is a Waratah EMU A set [8], so not a freight train.
162C is also a EMU A Set [8] Waratah, but this train is ARS.

Is this a bug, or is there a reason some trains are not ARS? (Except freight of course)
Are your SimSig settings setup to allow class 7 trains to be in ARS? F3 > ARS > Auto routesetting for:

"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Log in to reply
The following user said thank you: stighetl
Sydney North FAQ 26/06/2022 at 22:20 #146990
kaiwhara
Avatar
547 posts
Online
stighetl in post 146988 said:
Why are some trains entering area non-ARS?

786B entered the area non-ARS, and it couldn't be made ARS.

The train is a Waratah EMU A set [8], so not a freight train.
162C is also a EMU A Set [8] Waratah, but this train is ARS.

Is this a bug, or is there a reason some trains are not ARS? (Except freight of course)

EDIT:
I sent 786B (Non-ARS) into 2UP and made it into 186A, which is now ARS. Weird.
I concur with Headshot's post above. NSW Train numbering is very different to the UK, in that the first digit does not denote the class of train. For NSW sims, if you want ARS to work, you will need to select all class numbers in the ARS F3 menu set to "on".

Sorry guys, I am in the business of making people wait!
Log in to reply
The following user said thank you: stighetl
Sydney North FAQ 27/06/2022 at 06:23 #146992
Jsun
Avatar
200 posts
I've encountered another overlap anomaly, at Hornsby. The down overlap over 522 reverse (p2) swung while I was trying to call a route from HY106 to N20.70. I'm not sure whether or not this is a failure or a drawing artifact since the points do in fact turn.


Post has attachments. Log in to view them.
Log in to reply
Sydney North FAQ 27/06/2022 at 08:01 #146994
flabberdacks
Avatar
425 posts
Mantis 31622 - anomalies caused by bringing a train to a stand within the overlap of more than one signal - applies in many situations. If your overlaps start to play up, as they have there, just cancel routes in rear and reset them after the trains have moved off.
Log in to reply
The following user said thank you: Jsun
Sydney North FAQ 27/06/2022 at 18:40 #147003
stighetl
Avatar
94 posts
Thank you very much headshot119 and kaiwhara! I had only enabled ARS for Class 1-3, 5 and 9.


I encountered a bug now. Maybe the same bug jsun is talking about?



- Stig
Last edited: 27/06/2022 at 18:40 by stighetl
Reason: None given

Log in to reply
Sydney North FAQ 27/06/2022 at 23:27 #147008
kaiwhara
Avatar
547 posts
Online
Certainly is ;-)

stighetl in post 147003 said:
Thank you very much headshot119 and kaiwhara! I had only enabled ARS for Class 1-3, 5 and 9.


I encountered a bug now. Maybe the same bug jsun is talking about?



Sorry guys, I am in the business of making people wait!
Log in to reply