1. Home
  2. Library
  3. Data

Upcoming Games

No games to display
Full list
Add a game

Upcoming Events

No events to display

Who's Online

Crossing Failure at Thorne lasting in excess of 5 hours!!

You are here: Home > Forum > Simulations > Released > Doncaster (North) > Crossing Failure at Thorne lasting in excess of 5 hours!!

Page 1 of 1

Crossing Failure at Thorne lasting in excess of 5 hours!! 14/11/2023 at 21:03 #154079
bugsy
Avatar
1696 posts 		I've been playing Doncaster PSB (North revised times) 2019-01-09 SX.WTT and have encountered a slight problem.

Shortly after 5 pm today, I had to leave my computer to help with the preparation of dinner.
The sim time was 15:09 and both crossings at Thorne had failed, the first (THorne No.1) at 15.09 sim time and Thorne No. 2 at 15.21 sim time.

Unusually for me, I forgot to pause the game and when I returned to resume play at about 8.15 pm I could hear the sim telephone ringing.
The screen was absolutely full of trains, one behind the other as you can see from a small snippet in the screenshot.

I was under the illusion that crossing failures would be rectified at some point, but not more than 5 hours later. Note that I have activated the Emergency Replacement at the signals either side of the crossings. Was this a mistake?
Does this type of failure mean that I can't allow trains to cross, or after a certain length of time could I deactivate the ER and talk the trains across the crossings?

I have saved games every 10 minutes, so if any other saves are required. please let me know and I'll post a saved game for you to play with.

This all reminds me of maxand and his Derby sim.

Thanks


Edit: if there are any masochists out there who would like to sort out the chaos, let me know and I'll post a saved game for you to lay with
Post has attachments. Log in to view them.
Everything that you make will be useful - providing it's made of chocolate.
Last edited: 14/11/2023 at 21:10 by bugsy
Reason: None given
Log in to reply
Crossing Failure at Thorne lasting in excess of 5 hours!! 14/11/2023 at 21:58 #154084
headshot119
Avatar
4869 posts 		The save you have attached doesn't have either crossing in the failed state. I'm relatively sure though if you let a train over the crossing on each line at caution it will reset itself.
"Passengers for New Lane, should be seated in the rear coach of the train " - Opinions are my own and not those of my employer
Log in to reply
Crossing Failure at Thorne lasting in excess of 5 hours!! 15/11/2023 at 09:12 #154100
kbarber
Avatar
1712 posts 		bugsy in post 154079 said:
I've been playing Doncaster PSB (North revised times) 2019-01-09 SX.WTT and have encountered a slight problem.

Shortly after 5 pm today, I had to leave my computer to help with the preparation of dinner.
The sim time was 15:09 and both crossings at Thorne had failed, the first (THorne No.1) at 15.09 sim time and Thorne No. 2 at 15.21 sim time.

Unusually for me, I forgot to pause the game and when I returned to resume play at about 8.15 pm I could hear the sim telephone ringing.
The screen was absolutely full of trains, one behind the other as you can see from a small snippet in the screenshot.

I was under the illusion that crossing failures would be rectified at some point, but not more than 5 hours later. Note that I have activated the Emergency Replacement at the signals either side of the crossings. Was this a mistake?
Does this type of failure mean that I can't allow trains to cross, or after a certain length of time could I deactivate the ER and talk the trains across the crossings?

I have saved games every 10 minutes, so if any other saves are required. please let me know and I'll post a saved game for you to play with.

This all reminds me of maxand and his Derby sim.

Thanks


Edit: if there are any masochists out there who would like to sort out the chaos, let me know and I'll post a saved game for you to lay with :)
Shades of Maxand.

I'll get my coat on the way out...

Edit: Oh dear, I should've read Bugsy's last paragraph more fully. But a good time to remember Max, as we're close to his anniversary.
Last edited: 15/11/2023 at 09:13 by kbarber
Reason: None given
Log in to reply
Crossing Failure at Thorne lasting in excess of 5 hours!! 15/11/2023 at 10:03 #154103
jc92
Avatar
3631 posts
Online 		I suspect both the up and down train tripped the strike in for the AHB's which are located close to the protecting signals, forcing the barriers down, however as the signals are held at danger, the train is unable to cross so the barriers are remaining down indefinitely.

The failure indication (in Simsig at least) means the barriers have been down longer than the normal period allowed, rather than that the crossing has failed in the more traditional sense. as headshot says, once everything has cleared the strike ins, it will return to normal.
"We don't stop camborne wednesdays"
Log in to reply
Crossing Failure at Thorne lasting in excess of 5 hours!! 15/11/2023 at 10:42 #154107
lazzer
Avatar
605 posts 		kbarber in post 154100 said:
Shades of Maxand.

I'll get my coat on the way out...

Edit: Oh dear, I should've read Bugsy's last paragraph more fully. But a good time to remember Max, as we're close to his anniversary.
The first thing I thought when I saw this was Max :-)
Last edited: 15/11/2023 at 10:42 by lazzer
Reason: None given
Log in to reply
Crossing Failure at Thorne lasting in excess of 5 hours!! 16/11/2023 at 09:35 #154138
clive
Avatar
2738 posts 		jc92 in post 154103 said:

The failure indication (in Simsig at least) means the barriers have been down longer than the normal period allowed, rather than that the crossing has failed in the more traditional sense. as headshot says, once everything has cleared the strike ins, it will return to normal.
That's at least one meaning of "failure"; I forget what the others are.

The logic for AHBs is taken directly from the example circuit diagrams in the Red Book. So it should be prototypical.
Log in to reply
Crossing Failure at Thorne lasting in excess of 5 hours!! 16/11/2023 at 14:24 #154144
bugsy
Avatar
1696 posts 		headshot119 in post 154084 said:
The save you have attached doesn't have either crossing in the failed state. I'm relatively sure though if you let a train over the crossing on each line at caution it will reset itself.
Oh dear. A self-inflicted situation.
I'll run the sim again from an earlier save and do what you have suggested.

Thanks
Everything that you make will be useful - providing it's made of chocolate.
Log in to reply
Back