Page 1 of 1
| GL89 points 20/12/2023 at 21:40 #154785 | |
9pN1SEAp
1102 posts 
|
Hi, With a train approaching from GL9030 to 9014 at 14mph, I already had the king lever for 89 frame reversed before setting the route and I was able to reverse points lever 2 with the overlap still set and the train in motion. I received a message "error: swingset not all swingable" but it allowed me to pull off the GPL via lever 3 and the train sailed straight into Reception Line (9090) without slowing down! Also, I could not set route from headshunt 9009 to 9015 without the frame being returned, but could then release the frame and allow the king lever to be pulled, without GL9009 setting back on. 9015 did change from white to red when this happened, and as expected pulling lever 4 cleared it back to off. Finally, as 9015 had been set from both the GL signaller and the ground frame, it would not show correct route release when points reversed and 9014 pulled off (attached)! Thanks Jamie Post has attachments. Log in to view them. Jamie S (JAMS) Last edited: 20/12/2023 at 23:06 by 9pN1SEAp Reason: None given Log in to reply |
| GL89 points 20/12/2023 at 23:13 #154786 | |
|
9pN1SEAp
1102 posts
|
Also, with a route from 9018 (Salop Siding) to 9014, releasing the frame cases ACoA on 9018. Thanks Jamie Jamie S (JAMS) Log in to reply |
| GL89 points 21/12/2023 at 05:26 #154787 | |
Hap
986 posts
|
Cheers Jamie. Mantis 40010 for both of your posts. Ta Craig How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue Log in to reply The following user said thank you: 9pN1SEAp |