Page 1 of 1
| LEVEL CROSSING FAILURES 08/02/2010 at 20:14 #681 | |
mickev
37 posts |
Hi does any one know how to deal with a level x that has failed?
Log in to reply |
| LEVEL CROSSING FAILURES 08/02/2010 at 20:14 #6538 | |
|
mickev
37 posts |
Hi does any one know how to deal with a level x that has failed?
Log in to reply |
| LEVEL CROSSING FAILURES 08/02/2010 at 20:49 #6539 | |
nroberts
227 posts |
I would suggest resetting all signals protecting the crossing back to red. When the first train calls up held at a danger signal ask the driver to proceed past the signal at danger and examin the line. He would then call back at the next signal (usually after the level crossing) confirming the line is clear. How you handle it from there on is really up to you. You could just set the signals and let the trains run freely or I guess if you want to be prototypical you should talk all trains past the signal examining line until the failure is cleared up. If the level crossing shows obstructed (such as can be found in sheffield, trent and others) it means that the barriers didn't fully close and you won't be able to clear signals across it. You should raise the barriers and the re-lower then to clear the obstruction. Regards, Log in to reply |
| LEVEL CROSSING FAILURES 08/02/2010 at 21:37 #6540 | |
DriverCurran
683 posts |
I would say that all trains should be passing the protecting signals at danger, depending how true to life you want to make it Paul You have to get a red before you can get any other colour Log in to reply The following user said thank you: mickev |