Page 1 of 1
| v5.7 update issues 24/09/2020 at 20:56 #132675 | |
Splodge
701 posts |
I've reloaded my Ordsall Chord 2020 TT into the latest version of the sim with no issues which I'm pleased to report first of all. However in the 2018-20 there still appear to be a few issues I've found, though none of them are job-stoppers! : - MP703 is still being held at red until a train approaches - Signal MP516R is missing - MP518's banner repeater is sited on the up end of Clifton station - The auto button for the re-located MP512 is inoperative - MP/MC456 at Deansgate should have a BR as well (it's located on the same gantry as the MP/MC458 BR) There's the right way, the wrong way and the railway. Last edited: 24/09/2020 at 21:00 by Splodge Reason: None given Log in to reply |
| v5.7 update issues 24/09/2020 at 21:20 #132676 | |
Steamer
3921 posts |
Thanks; a few of these have already been picked up, and I've added notes/ re-opened tickets for the rest. Splodge in post 132675 said: #30880 Quote: - Signal MP516R is missing#31594 Quote: - MP518's banner repeater is sited on the up end of Clifton station#30850 Quote: - The auto button for the re-located MP512 is inoperative#31599 Quote: - MP/MC456 at Deansgate should have a BR as well (it's located on the same gantry as the MP/MC458 BR)#30850 "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Last edited: 24/09/2020 at 21:20 by Steamer Reason: None given Log in to reply |
| v5.7 update issues 24/09/2020 at 23:11 #132680 | |
|
Splodge
701 posts |
Also, I've seen this before but never with enough detail to confirm it being an issue - but in my 2020 TT (2018-2020 era), 5P13 is booked to wait at Oxford Road. Initially I signalled it to MC418 so it would fit in the platform and allow another service round it in P4. When that service was away, I set the route for 5P13 only for it to draw forward and only then wait time blocking the up end of the station. The train is 130m long so should fit, albeit quite tightly, and realistically for any call there a driver would leave the back end hanging off to be able to see the platform signal (and at Northern our ASDO only supports locking out doors from the back which I would assume is the same for the TPE fleets). Additionally, trains in the full length of P3 subsequently won't operate TRTS when this happens.  EDIT 25/9 - just to add that when the train was stopped at MC418, it did fit in the platform according to track circuits (and I could run things round); it just didn't recognise the stopping position. Post has attachments. Log in to view them. There's the right way, the wrong way and the railway. Last edited: 25/09/2020 at 08:39 by Splodge Reason: Additional clarification Log in to reply |
| v5.7 update issues 19/11/2020 at 14:07 #133977 | |
|
Splodge
701 posts |
A couple more I have discovered, 2020 era: MP1220 (exit from Brindle Heath Up sidings) cannot set any route. Somehow I have also managed to get MP802 at Crows Nest Jn to flash from red to yellow - I believe it's a flashing yellow but the 'off' icon is shown as red. Quite difficult to describe the exact circumstances, or if I'll be able to replicate it so I've attached a save. Post has attachments. Log in to view them. There's the right way, the wrong way and the railway. Log in to reply |
| v5.7 update issues 19/11/2020 at 22:44 #133983 | |
|
Steamer
3921 posts |
Splodge in post 133977 said:A couple more I have discovered, 2020 era:#31714 (already logged on Mantis), also affects 514-> 510, probably because of 512 moving between eras. Not had a look at the save yet. "Don't stress/ relax/ let life roll off your backs./ Except for death and paying taxes/ everything in life.../ is only for now." (Avenue Q) Log in to reply |