Upcoming Games

No games to display

Add a game

Upcoming Events

08/09/2018 11:30:00
17/11/2018 12:00:00
01/06/2019 12:00:00

Who's Online

Latest update problems

You are here: Home > Forum > Simulations > Released > Birmingham New Street > Latest update problems

Page 1 of 1

Latest update problems 10/04/2018 at 23:46 #107449
Oddjob
Avatar
109 posts
I have just downloaded the latest update for New Street and have encountered the following:

Platform 8A (Up direction) TRTS given but no flashing white roundel - minor issue
Train 1M62 given TRTS, route set and signal cleared but train list says "Held by conditions"
Signal 209 goes to approach locking after a train passes it.

Log in to reply
Latest update problems 11/04/2018 at 05:10 #107451
GeoffM
Avatar
3973 posts
I can't reproduce 8A TRTS (was given and visibly flashing white with signal at red) though I have just realised the "held by conditions" may be an issue for some signals.

Do you remember which platform 1M62 was in? There are also two of them in the default timetable though I think it may be a signal issue rather than train issue.

Can confirm 205/209/199/208 approach locking though not too sure why at the moment.

Apologies. WIll look again tomorrow.

SimSig Boss. Website issues: Check here first: https://www.simsig.co.uk/Wiki/Show?page=newwebsite
Log in to reply
Latest update problems 11/04/2018 at 09:07 #107454
Trainfan344
Avatar
156 posts
Have missed several trains at New Street that are sat at a Red with no TRTS flashing white roundel saying "Held by conditions", then when signal cleared they move no problem.
Log in to reply
Latest update problems 11/04/2018 at 20:45 #107471
Banners88
Avatar
51 posts
Unable to route from 172 on platform 6A to 149 on Up Stour and get a points locked message with no other trains around that would be locking route up.

APPEARS TO BE RESOLVED WITH FURTHER UPDATE.

Last edited: 11/04/2018 at 20:45 by Banners88
Reason: None given

Log in to reply
Latest update problems 11/04/2018 at 21:44 #107477
Oddjob
Avatar
109 posts
GeoffM Train 1M62 was in platform 6B
Log in to reply
The following user said thank you: GeoffM
Latest update problems 12/04/2018 at 00:34 #107485
BarryM
Avatar
2007 posts
Down Stour signal 143 causing ACOAs.

Shall I put it on Mantis?

Barry

Barry, Sydney, New South Wales, Australia
Log in to reply
Latest update problems 12/04/2018 at 10:55 #107489
Banners88
Avatar
51 posts
Now finding problems in routing trains permissively onto platforms. Process is...

1. Route trains through from A to B end of platform, platform 12 for example.
2. Train comes to a stand at the B end of the platform but route remains set in (signal post icon still white).
3. First attempt to route train in permissively says 'cannot overset a different route (182 to 212).
4. If you attempt to cancel the route it goes to '120 seconds approach locking', trying to then retry and still get the 'cannot overset a different route' effectively meaning a 2 minute delay for any train that needs to be signalled permissively.
5. Once 120 second has timed out problem seems to go away and you can route and take back permissive route to your hearts content.

Permissive working still works in all other examples as far as I can work out.

Not been an issue as far as I'm aware until recent update.

Problem of being unable to set a route for low numbered platforms permissive working which does not happen until the track circuit next to it is active is still a problem on this sim.

Log in to reply
Latest update problems 28/04/2018 at 08:33 #107727
BarryM
Avatar
2007 posts
Today, an update of BNS has been released. Click on Loader's Check for Updates button.

Barry

Barry, Sydney, New South Wales, Australia
Last edited: 28/04/2018 at 08:40 by BarryM
Reason: None given

Log in to reply
Latest update problems 28/04/2018 at 08:58 #107729
BarryM
Avatar
2007 posts
Strange, Today, I loaded a previous saved file expecting an Update message. No message appeared!
BNS version 1.6

Barry

Barry, Sydney, New South Wales, Australia
Last edited: 28/04/2018 at 09:02 by BarryM
Reason: None given

Log in to reply
Latest update problems 28/04/2018 at 09:57 #107730
boysha
Avatar
7 posts
Morning,

Still have issues setting a route from Sig 172 plt 6 to the Up Stour.

I have downloaded the latest update.

Loader version 4.6.12
BNS version 1.6

Shane

Last edited: 28/04/2018 at 09:58 by boysha
Reason: None given

Log in to reply
Latest update problems 28/04/2018 at 10:29 #107732
JamesN
Avatar
976 posts
boysha in post 107730 said:
Morning,

Still have issues setting a route from Sig 172 plt 6 to the Up Stour.

I have downloaded the latest update.

Loader version 4.6.12
BNS version 1.6

Shane
Re-opened on bug board; ticket 20119.

Log in to reply
Latest update problems 28/04/2018 at 10:46 #107733
BarryM
Avatar
2007 posts
boysha in post 107730 said:
Morning,

Still have issues setting a route from Sig 172 plt 6 to the Up Stour.

I have downloaded the latest update.

Loader version 4.6.12
BNS version 1.6

Shane
I can only assume that the issue was not reported in Mantis.

It has now been reported Mantis #20289.

Barry

Barry, Sydney, New South Wales, Australia
Last edited: 28/04/2018 at 10:58 by BarryM
Reason: None given

Log in to reply
Latest update problems 28/04/2018 at 10:50 #107734
boysha
Avatar
7 posts
Thanks, also have the same issue from sig 171

Shane

Log in to reply
Latest update problems 31/05/2018 at 23:46 #108394
BarryM
Avatar
2007 posts
BarryM in post 107733 said:
boysha in post 107730 said:
Morning,

Still have issues setting a route from Sig 172 plt 6 to the Up Stour.

I have downloaded the latest update.

Loader version 4.6.12
BNS version 1.6

Shane
I can only assume that the issue was not reported in Mantis.

It has now been reported Mantis #20289.

Barry
Latest Update downloaded today. Thank you Geoff.

Barry

Barry, Sydney, New South Wales, Australia
Log in to reply
Latest update problems 02/06/2018 at 11:29 #108414
boysha
Avatar
7 posts
Thanks all, now time to get back to this amazing sim
Log in to reply
Latest update problems 03/08/2018 at 11:08 #110712
lazlo52
Avatar
44 posts
Not seen this reported..
Signal 166 plat 9A and Signal 183 plat 11 fail to clear on passage of train.
Signal 208 plat 2 times out after passage of train.
Signal 209 plat 1 times out after passage of train.
Signal 201 plat 5 times out after passage of train.
Signal 203 plat 4 times out with no train approaching after train leaves platform in opposite direction. (train is beyond approaching signal).

Only happened after the latest update.

Last edited: 03/08/2018 at 11:51 by lazlo52
Reason: None given

Log in to reply
Latest update problems 04/08/2018 at 18:15 #110755
GeoffM
Avatar
3973 posts
lazlo52 in post 110712 said:
Not seen this reported..
Signal 166 plat 9A and Signal 183 plat 11 fail to clear on passage of train.
Signal 208 plat 2 times out after passage of train.
Signal 209 plat 1 times out after passage of train.
Signal 201 plat 5 times out after passage of train.
Signal 203 plat 4 times out with no train approaching after train leaves platform in opposite direction. (train is beyond approaching signal).

Only happened after the latest update.
Hmm, single TC routes. "Signal 166 plat 9A and Signal 183 plat 11 fail to clear on passage of train" - I think you mean the route failed to cancel. The signals would be broken if they clear as a train passes

SimSig Boss. Website issues: Check here first: https://www.simsig.co.uk/Wiki/Show?page=newwebsite
Log in to reply
Latest update problems 08/08/2018 at 17:58 #110838
lazlo52
Avatar
44 posts
GeoffM in post 110755 said:
lazlo52 in post 110712 said:
Not seen this reported..
Signal 166 plat 9A and Signal 183 plat 11 fail to clear on passage of train.
Signal 208 plat 2 times out after passage of train.
Signal 209 plat 1 times out after passage of train.
Signal 201 plat 5 times out after passage of train.
Signal 203 plat 4 times out with no train approaching after train leaves platform in opposite direction. (train is beyond approaching signal).

Only happened after the latest update.
Hmm, single TC routes. "Signal 166 plat 9A and Signal 183 plat 11 fail to clear on passage of train" - I think you mean the route failed to cancel. The signals would be broken if they clear as a train passes :D
Absolutely right, error on my part. Signal failed to cancel.

Log in to reply