Manchester East SX 08 04 2015

You are here: Home > Forum > Simulations > Timetables > Manchester East > Manchester East SX 08 04 2015

Page 3 of 3

Manchester East SX 08 04 2015 07/11/2019 at 23:10 #121536
Phil-jmw
Avatar
669 posts
Looking for advice please. How can I amend a freight train's or light loco's schedule so that it doesn't wait until booked time to depart a given location? I have 0H55 running a few mins early, booked to depart Guide Bridge at 0217 into the yard after changing ends. In reality, as long as the yard has accepted him and he has the signal, he would normally depart into the yard as soon as he's changed ends and got his air back up, which does happen in many other TT's, but in this one the dvr stubbornly waits for booked time, which is generally unrealistic. What do I need to amend to make this happen?

Regards,

Phil.

Last edited: 07/11/2019 at 23:11 by Phil-jmw
Reason: None given

Log in to reply
Manchester East SX 08 04 2015 07/11/2019 at 23:46 #121537
postal
Avatar
5189 posts
Not a foolproof method but you can set the timing at Guide Bridge as "set down only". This does not force the loco to move early but it often will.

I raised this issue on Mantis on 11/09/2017 (#17852) as a Proposal (Request for comments). I suggested that there should be an option to force departure as soon as circumstances permit. To date there have been no comments or feedback.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 00:03 #121538
Phil-jmw
Avatar
669 posts
postal in post 121537 said:
Not a foolproof method but you can set the timing at Guide Bridge as "set down only". This does not force the loco to move early but it often will.

I raised this issue on Mantis on 11/09/2017 (#17852) as a Proposal (Request for comments). I suggested that there should be an option to force departure as soon as circumstances permit. To date there have been no comments or feedback.
Thanks for the reply Postal. 0H55 is in the yard now, but the next opportunity I get I'll give your suggestion a try. Thanks also for previously raising it on Mantis. Aside from when a driver wants to make a cup of tea or take his full PNB (in which case he'd tell the signalman not to pull off), in my experience when the signal comes off they're on the move.

Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 00:54 #121539
GeoffM
Avatar
6274 posts
Online
postal in post 121537 said:
Not a foolproof method but you can set the timing at Guide Bridge as "set down only". This does not force the loco to move early but it often will.

I raised this issue on Mantis on 11/09/2017 (#17852) as a Proposal (Request for comments). I suggested that there should be an option to force departure as soon as circumstances permit. To date there have been no comments or feedback.
As has been explained to you over and over again, a lack of response implies nothing: it's in the queue for consideration.

SimSig Boss
Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 08:38 #121541
kbarber
Avatar
1708 posts
Phil-jmw in post 121538 said:
postal in post 121537 said:
Not a foolproof method but you can set the timing at Guide Bridge as "set down only". This does not force the loco to move early but it often will.

I raised this issue on Mantis on 11/09/2017 (#17852) as a Proposal (Request for comments). I suggested that there should be an option to force departure as soon as circumstances permit. To date there have been no comments or feedback.
Thanks for the reply Postal. 0H55 is in the yard now, but the next opportunity I get I'll give your suggestion a try. Thanks also for previously raising it on Mantis. Aside from when a driver wants to make a cup of tea or take his full PNB (in which case he'd tell the signalman not to pull off), in my experience when the signal comes off they're on the move.
Surely in this case he'd want to get into the yard ASAP to get an early start to his PNB (or perhaps a few minutes early book-off, or even to be there in time for that juicy bit of overtime the TCS has hanging around).

Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 09:16 #121542
postal
Avatar
5189 posts
GeoffM in post 121539 said:
postal in post 121537 said:
Not a foolproof method but you can set the timing at Guide Bridge as "set down only". This does not force the loco to move early but it often will.

I raised this issue on Mantis on 11/09/2017 (#17852) as a Proposal (Request for comments). I suggested that there should be an option to force departure as soon as circumstances permit. To date there have been no comments or feedback.
As has been explained to you over and over again, a lack of response implies nothing: it's in the queue for consideration.
I was making a statement of fact so that the OP was aware of the situation. I was not implying anything else.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Last edited: 08/11/2019 at 09:16 by postal
Reason: None given

Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 13:34 #121543
jc92
Avatar
3626 posts
Online
I thought set down only didn't affect CL. 0,3,4,6-0 anyway and they trey every stop as set down only. Or am I mistaken?
"We don't stop camborne wednesdays"
Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 17:14 #121547
postal
Avatar
5189 posts
It was my understanding that Cl. 0 waited for time but I have been known to be wrong!
“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 18:59 #121548
northroad
Avatar
870 posts
postal in post 121537 said:
Not a foolproof method but you can set the timing at Guide Bridge as "set down only". This does not force the loco to move early but it often will.

I raised this issue on Mantis on 11/09/2017 (#17852) as a Proposal (Request for comments). I suggested that there should be an option to force departure as soon as circumstances permit. To date there have been no comments or feedback.
I think this is definitely in the “It will be ready when it’s ready” category. A bit like Crossrail me thinks.

G

Log in to reply
The following user said thank you: jc92
Manchester East SX 08 04 2015 08/11/2019 at 19:15 #121549
Meld
Avatar
1098 posts
Looking at this a little closer, it should be possible to clear the line earlier in the event of early running.

I'm thinking something along the lines of matching the timetabled reversing time as a custom dwell time with a set down stop as well.

So in the case of an early running 0H55 it would still get the 5 min reversal but then be able to depart as soon as the dwell expires.

Passed the age to be doing 'Spoon Feeding' !!!
Log in to reply
Manchester East SX 08 04 2015 08/11/2019 at 19:44 #121550
postal
Avatar
5189 posts
Meld in post 121549 said:
Looking at this a little closer, it should be possible to clear the line earlier in the event of early running.

I'm thinking something along the lines of matching the timetabled reversing time as a custom dwell time with a set down stop as well.

So in the case of an early running 0H55 it would still get the 5 min reversal but then be able to depart as soon as the dwell expires.
That's the problem, though. "Able to depart" does not mean "will depart" which is where the reality and SimSig sometimes diverge.

“In life, there is always someone out there, who won’t like you, for whatever reason, don’t let the insecurities in their lives affect yours.” – Rashida Rowe
Log in to reply