Upcoming Games

(UTC times)


Full list
Add a game

Upcoming Events

No events to display

Crewe FAQ

You are here: Home > Forum > Simulations > Released > Crewe > Crewe FAQ

Page 5 of 5

Crewe FAQ 21/02/2024 at 20:21 #155437
i26
Avatar
308 posts
HST125Scorton in post 155435 said:
I'm still getting telephone calls from Crossing Users at Lower Radley even though it was disabled at the start 'NLX_OFF active at start'.
Save provided.

OS: Windows 10 Home 64bit
Loader: SimSig Loader version 5.28; Sim: Simulation Crewe; data version 1.3
License: Locked license in use
TT: Crewe PSB Pre-Covid 2020 v1.2.0
TT filename: Crewe PSB Pre-Covid 2020.WTT
TT merged: False
Sim upgrade: False
Loader upgrade: False
Save reloaded: True
NERA2015 active at start
NERA_DCI_OOU active at start
NERA_DED_OOU active at start
NTORR_ENABLED active at start
NTORR active at start
NLX_OFF active at start
NEXTRA_AUTOS_OFF active at start
NABON_FRINGE_OFF active at start
NABON_INTERNAL_OFF active at start
NPROBLEMS active at start
NNONE active at start
NNORMAL active at start
NSALOP choice 1
Mantis 40337


Log in to reply
Crewe FAQ 27/02/2024 at 12:36 #155497
Splodge
Avatar
716 posts
Online
How do I set a route from NH21 to Gresty Lane via GL4 (1990-2007 era)? I can't request a slot for the wrong line move and can't route signal to signal. The manual mentions the block being normal but I'm playing without the block instruments so don't know if that might be causing some sim confusion?
There's the right way, the wrong way and the railway.
Log in to reply
Crewe FAQ 27/02/2024 at 14:23 #155498
Hap
Avatar
1029 posts
What is happening when you hit the RQST roundel?

I've just set the sim up to your settings and have set the route through no problem.




Post has attachments. Log in to view them.
How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue
Log in to reply
Crewe FAQ 27/02/2024 at 14:52 #155499
Splodge
Avatar
716 posts
Online
Nothing - no flashing or solid white in either roundel (applies to all the wrong-direction roundels around SSN). It applies with the onward route set from GL4 too.

I have tried a sim with no TT and the same settings and it works fine, and then with the same TT and again it works fine so I have no idea what has caused it in this specific case.

Fresh Load
Quote:
OS: Windows 10 Home 64bit
Loader: SimSig Loader version 5.28; Sim: Simulation Crewe; data version 1.3
License: Dynamic license in use
TT: Crewe Summer 2003 Weekday v1.2.0
TT filename: Crewe Summer 2003 Weekday.WTT
TT merged: False
Sim upgrade: False
Loader upgrade: False
Save reloaded: False
NERA active at start
NERA choice 1
NERA1990 active at start
NERA_DCI_OOU active at start
NTORR_ENABLED active at start
NTORR active at start
NLX_OFF active at start
NEXTRA_AUTOS active at start
NEXTRA_AUTOS_ON active at start
NABON_FRINGE_OFF active at start
NABON_FRINGE_SHR_OFF active at start
NABON_INTERNAL_OFF active at start
NABON_INTERNAL_OFF_OLD active at start
NPROBLEMS active at start
NNONE active at start
NNORMAL active at start
NSALOP choice 1
Issue Load
Quote:
OS: Windows 10 Home 64bit
Loader: SimSig Loader version 5.28; Sim: Simulation Crewe; data version 1.3
License: Dynamic license in use
TT: Crewe Summer 2003 Weekday v1.2.0
TT filename: Crewe Summer 2003 Weekday.WTT
TT merged: False
Sim upgrade: False
Loader upgrade: False
Save reloaded: True
NERA active at start
NERA1990 active at start
NERA_DCI_OOU active at start
NTORR_ENABLED active at start
NTORR active at start
NLX_OFF active at start
NEXTRA_AUTOS active at start
NEXTRA_AUTOS_ON active at start
NABON_FRINGE_OFF active at start
NABON_FRINGE_SHR_OFF active at start
NABON_INTERNAL_OFF active at start
NABON_INTERNAL_OFF_OLD active at start
NPROBLEMS active at start
NNONE active at start
NNORMAL active at start
NSALOP choice 1

There's the right way, the wrong way and the railway.
Last edited: 27/02/2024 at 14:52 by Splodge
Reason: None given

Log in to reply
The following user said thank you: Hap
Crewe FAQ 27/02/2024 at 18:28 #155500
Splodge
Avatar
716 posts
Online
Just restarted the sim and TT (made a mess of Basford Hall...) and train one went through fine. Tried a second one and the same unclickable roundels occured. Do certain points need to be set a specific way? I've tried most of the obvious ones but I might be missing some to meet the 'normal' condition
There's the right way, the wrong way and the railway.
Log in to reply
The following user said thank you: Hap
Crewe FAQ 27/02/2024 at 18:52 #155501
pedroathome
Avatar
915 posts
Splodge in post 155500 said:
Just restarted the sim and TT (made a mess of Basford Hall...) and train one went through fine. Tried a second one and the same unclickable roundels occured. Do certain points need to be set a specific way? I've tried most of the obvious ones but I might be missing some to meet the 'normal' condition
Mantis 40373

Yea, eerm, you've broken it, and, not just a little bit. I will do some digging on whats going on here

Log in to reply
The following users said thank you: wulf, Splodge, Hap
Crewe FAQ 28/02/2024 at 15:14 #155507
Robyn
Avatar
74 posts
Online
Where on earth is the location "Crewe Down Loop" and second, why according to the timetable writer is a route CDL - Crewe (DFL) authorised, but not the other way around? If I knew where this location actually was I would probably be able to answer this question myself. But, as I do not I cannot.
7-5-5, closing of comment
Log in to reply
Crewe FAQ 28/02/2024 at 16:08 #155510
Hap
Avatar
1029 posts
RobJ in post 155507 said:
Where on earth is the location "Crewe Down Loop" and second, why according to the timetable writer is a route CDL - Crewe (DFL) authorised, but not the other way around? If I knew where this location actually was I would probably be able to answer this question myself. But, as I do not I cannot.
Down Salop Goods Loop on sim from Gresty to South Panel.

Mantis 40384 to address/query the labeling information.

How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue
Log in to reply
Crewe FAQ 28/02/2024 at 22:12 #155511
Robyn
Avatar
74 posts
Online
Hap in post 155510 said:
RobJ in post 155507 said:
Where on earth is the location "Crewe Down Loop" and second, why according to the timetable writer is a route CDL - Crewe (DFL) authorised, but not the other way around? If I knew where this location actually was I would probably be able to answer this question myself. But, as I do not I cannot.
Down Salop Goods Loop on sim from Gresty to South Panel.

Mantis 40384 to address/query the labeling information.
Ok so that sorts that, however we now have the issue of Crewe station -> Crewe Down Loop not being a valid route according to the tt editor. However CDL -> Crewe station, is valid. Bug? Because you can set CSJs UP dir homes to back into the Salop loop, and Gresty can grant the slot. So I feel as tho that should be a valid route on the tt editor.

7-5-5, closing of comment
Log in to reply
Crewe FAQ 28/02/2024 at 22:39 #155512
Hap
Avatar
1029 posts
RobJ in post 155511 said:
Hap in post 155510 said:
RobJ in post 155507 said:
Where on earth is the location "Crewe Down Loop" and second, why according to the timetable writer is a route CDL - Crewe (DFL) authorised, but not the other way around? If I knew where this location actually was I would probably be able to answer this question myself. But, as I do not I cannot.
Down Salop Goods Loop on sim from Gresty to South Panel.

Mantis 40384 to address/query the labeling information.
Ok so that sorts that, however we now have the issue of Crewe station -> Crewe Down Loop not being a valid route according to the tt editor. However CDL -> Crewe station, is valid. Bug? Because you can set CSJs UP dir homes to back into the Salop loop, and Gresty can grant the slot. So I feel as tho that should be a valid route on the tt editor.
Mantis 40390 for missing path.

How to report an issue: www.SimSig.co.uk/Wiki/Show?page=usertrack:reportanissue
Log in to reply
Crewe FAQ 03/03/2024 at 15:43 #155559
Splodge
Avatar
716 posts
Online
An unusual pathing issue from the 1993 TT!


Post has attachments. Log in to view them.
There's the right way, the wrong way and the railway.
Log in to reply
Crewe FAQ 01/04/2024 at 12:31 #155913
HST125Scorton
Avatar
1186 posts
Suggestion:

Could Crewe Sydney Bridge be removed as required pathing time point on the 2023 era? As this timing point isn't used anymore pretty much since Crewe was released. Basically the following;
Crewe to Sandbach without needing Crewe Sydney Bridge.
Crewe Salop Jn to Sandbach without needing Crewe Sydney Bridge.
Sandbach to Crewe Salop Jn without needing Crewe Sydney Bridge.
It's tedious having to use 00:00 pass tick at Sydney Bridge and when you have a timetable with over a 1000 trains over a 72hr period.

Example 1W18:
http://charlwoodhouse.co.uk/rail/livetrain/$32063992/30/03/24

Example 4H67:
http://charlwoodhouse.co.uk/rail/livetrain/$32009033/28/03/24

Aaron (AJRO) | Timetable Writer
Last edited: 01/04/2024 at 12:32 by HST125Scorton
Reason: None given

Log in to reply
Crewe FAQ 16/09/2024 at 14:36 #158558
Splodge
Avatar
716 posts
Online
Are there any TTs as yet chainable with the Groundhog provided with Crewe, or indeed user contributed? I know there were TT issues when the sim was released but it seems to be the case still when chained to Manchester South (2015 GH)
There's the right way, the wrong way and the railway.
Log in to reply
Crewe FAQ 16/09/2024 at 17:22 #158562
BenWright
Avatar
194 posts
Online
Hi, not sure if it's been mentioned before but trains leaving platform 8 will pull up to the signal when departing even if it's a red
Log in to reply